Detecting your location...
Detecting your location...
$25 off $200 — Draft & Kegging Sale On qualifying Draft & Kegging items — ends Monday 11:59pm PST
Shop Now
Brewing Equipment Category
Homebrew Equipment

Brew Better Beer with Pro-Level Gear

Equip your home brewery without breaking the bank. From heavy-duty mashing kettles to precise transfer pumps, we have exactly what you need to craft the perfect pint.

  • Free Shipping on qualifying high-quality gear orders over $59.
  • Ready-to-Brew Kettles designed for immediate, highly effective brewing.
  • Fast & Efficient Cooling using our premium wort chillers to prep for yeast.
  • Effortless Liquid Transfers with our self-priming and magnetic drive pumps.
Step 1

Mash & Boil

Extract rich flavors and boil your wort using our heavy-duty standard or modified kettles and high-output burners.

Step 2

Chill & Transfer

Rapidly drop the temperature with a wort chiller, then use a magnetic drive pump to seamlessly move your beer into a fermenter.

Step 3

Ferment & Enjoy

Pitch your yeast, allow the fermentation magic to happen, and pour yourself a perfect, refreshing homemade pint.

Shop by collection
987 products

  • Blichmann BrewVision - USB Cable Blichmann BrewVision - USB Cable

    Blichmann BrewVision - High Temp USB Cable

    The BrewVision transmitter can be vulnerable to the high heat coming from your kettle. This high temp USB cable allows you to mount the BrewVision transmitter away from your kettle to keep the transmitter cool while still sending all that important data.

    $10.00

  • Stainless - 3/4 in. BSPP Lock Nut Stainless - 3/4 in. BSPP Lock Nut

    Stainless Lock Nut - 3/4 in. BSPP

    Stainless Lock Nut. 3/4 in. Female BSPP. BSP vs. BSPP BSP (or BSPT) fittings have a tapered thread and require teflon tape to form a seal between the male and female fitting. BSP fittings are generally intended to be used with their counterpart of the same thread type. ONLY 1/2" BSP fittings are compatible with US-standard NPT fittings of the same size. BSPP fittings, on the other hand, have a straight thread, require a gasket seated inside the female fitting to form a seal, and are not compatible with NPT. KegLand Part Number: KL06538

    $3.29

  • Brew Bucket Mini - Replacement Base

    Replacement Silicone Base for the Brew Bucket Mini Fermenter

    Replacement silicone base for the Brew Bucket Mini Fermenter

    $21.95

  • Low stock! Brewtools - F40 Unitank Light 20-40 liters capacity Brewtools - F40 Unitank Light 20-40 liters capacity

    Brewtools | F40 Unitank Light | 5.2-10.5 Gallon Capacity | 20-40L

    Unitank Light offers the same tank body as the standard Brewtools Unitank with a slight difference in included accessories for a more affordable price Ferment, cold crash, and carbonate beer all in one vessel with the Brewtools F-Series Unitank Cooling jacket welded to the vertical walls of the tank provide superior cooling capabilities compared to in-solution cooling coils Made from stainless steel throughout with Brewtools' proprietary PureBlast™ surface—no passivation required, simply rinse with warm water before your first use Pressure rated to 30 PSI so you can safely ferment under pressure and pressure transfer finished beer to kegs with virtually no oxygen pickup Brewtools is a Norwegian brand known for high-quality products made without compromise. From brewing systems to fermenters, they continue to push the envelope of innovation for homebrewers around the globe All valves, fittings, and gaskets come included Unitank Light is the same tank body as the standard Brewtools Unitank, but with slightly less equipment and some parts made from Polyketone (POK), which vastly reduces cost without compromising the user experience for smaller tanks. Unitank Light can be upgraded to a standard Unitank where you prefer. Key Differences: CleanCore butterfly valves made from Polyketone Barbed blow-off PRV Can be set to open during fermentation for blow-off Also acts as 2 bar / 30 psi safety valve Pushfit sample valve Compatible with optional Push-fit Coil and Adapter Polyketone 8” to 3” tri-clamp lid adapter replaces stainless steel adapter Polyketone racking arm replaces stainless steel racking arm Does not include neoprene insulation jacket, ss blow-off tube or ss blow-off valve Brewtools Unitanks are fermenters made for ambitious homebrewers and small breweries. As part of the Brewtools identity, they've explored new techniques and solutions. This has resulted in a series of high-end fermentation tanks with new features and a lot of possibilities. Key Features: Brewtools PureBlast™ surface inside and out which eliminate the use of wax and polishing compounds and does not require passivation Cooling jacket in the vertical walls offers efficient cooling without the hassle of cleaning a coil Many options for connecting accessories like sensors, heaters, carb. stones and other accessories Conical pressure rated for 2 bar / 30 PSI Cooling jacket pressure rated for 0.5 bar / 7 PSI 8" TC port on top for easy access 2" TC dump and racking valves Brewtools Unitanks are designed and manufactured with special attention to safety and quality. They are tested and certified according to the requirements for PED 2014/68/EU by a third party. Specifications: Low height w/o acc.: 32.6" Max height w/o acc.: 40.5" Packaging size: 33.4" (h) x 20.5" (w) x 20.5" (d) Net weight: 73 lbs Gross weight: 88 lbs Tank diameter (inside): Ø15.75" Gross volume: 13.5 gal Max rec. volume: 10.5 gal Min rec. volume: 5.3 gal Volume, cone: 3.1 gal Material: 1.5mm stainless steel (SS304) Operating pressure: 1.0 bar / 15 PSI Max pressure: 2.0 bar / 30 PSI Min. pH: 4.0 In the box: Unitank with adjustable frame 1 pcs Analog pressure gauge, TC34mm 2 pcs CleanCore Butterfly-valve, 2" 1 pcs Racking arm 2", POK 1 pcs TC elbow 90°, 2" 1 pcs Sample valve, 34mm, POK 1 pcs TC Adapter 8"-3", POK 1 pcs TC blind cap, 3" 1 pcs TC blind cap 2" 2 pcs TC blind cap 1.5" 4 pcs TC blind cap 34mm 2 pcs TC gasket 8" lipped 2 pcs TC gasket 3" 2 pcs TC gasket 2" 5-pack 1 pcs TC gasket 1.5" 5-pack 3 pcs TC gasket 34mm 5-pack (DN20) 1 pcs Tri Clamp 8" 1 pcs Tri Clamp 3" 5 pcs Tri Clamp 2" 2 pcs Tri Clamp 1.5" 9 pcs Tri Clamp 34mm 1 pcs TC tool 4 pcs M10 steel/rubber feet 1 pcs TC34mm pull-type PRV/Safety valve with 7mm barb 1.5m (4.9') Silicone tube 6x10mm Necessary bolts and parts for assembly 5 year manufacturer's warranty Recommended accessories include: HopDrop-kit, Thermowells for your sensors, 34mm Ball-Lock gas adapter for CO2 filling, Carb. stone kit with Ball-Lock, Coil for sample valve, Spunding valve, Hose barbs for filling and dumping, 2" sight glass etc. For User Manuals and support, please follow this link to Brewtools Docs. NOTE: Model in photo is a prototype. Minor changes and improvements may occur.

    $1,603.00

  • Anvil Foundry Recirculation Pump Kit - 18 gal

    Anvil Foundry™ Recirculation Pump Kit - 18 gal.

    Anvil Foundry Recirculation Pump Kit for 18 gal units.   Features: Anvil Recirculation Pump 4 ft. of Silicone Hose 4 Hose Clamps Flow Clamp Stainless Return Tube Perforated Disc Eye Bolt & Nuts for Eye Bolt

    $109.99

  • BrewBuilt Bottom Drain Kettle - Boil - PLACEHOLDER BrewBuilt Bottom Drain Kettle - Boil - PLACEHOLDER

    BrewBuilt® Bottom Drain Boil Kettle | Cooling Jacket | Tangential Whirlpool Inlet

    Pro-Grade Construction: Made from high-quality 304 stainless steel with a welded dish bottom for complete drainage and easy cleaning. Enhanced Cooling & Clarity: Includes an innovative jacketing system for efficient cooling and a welded tangential arm for enhanced whirlpooling, ensuring clear wort transfers and maximum hop utilization. Sanitary Connections: Features sanitary welded TC ferrules for leak-free, professional-grade connections. Enhanced Usability: Includes silicone-gripped handles, a TC-ported lid for CIP, and raised legs for convenient access. Fully Customizable: The kettle arrives without fittings or valves, giving you a blank canvas to customize with your preferred accessories. Elevate your homebrewing craft with the BrewBuilt Dish Bottom Kettle, now enhanced with a tangential whirlpool arm and an integrated cooling jacket. This professional-grade kettle is meticulously crafted from high-quality 304 stainless steel, ensuring durability and a lifetime of flawless brews. Experience the revolutionary welded dish bottom, engineered for unparalleled complete drainage, ensuring every precious drop of wort is utilized and cleanup becomes a breeze. The integrated tangential whirlpool arm allows for efficient hop and trub separation, creating a compact cone at the bottom of your kettle, leading to clearer wort and better fermentation. The built-in cooling jacket provides rapid and controlled chilling of your wort, eliminating the need for external immersion chillers and streamlining your brew day. High-quality sanitary welded TC Ferrules provide a lifetime of leak-free use and make sanitary connections effortless, a standard in professional breweries now accessible for homebrewing. Comfort and safety are prioritized with silicone-gripped handles to protect your hands from heat. The lid comes welded with a TC port, ready for CIP (Clean-in-Place) and other future accessories. For convenient access to lower ports, the kettle is raised on sturdy legs. BrewBuilt Kettles are the same high-performance kettles used in our Next Generation BrewSculptures, guaranteeing professional-grade results. Available in a wide range of popular homebrew sizes—10, 15, 20, 30, and 50 gallons—they cater to every brewing scale. Build Your Own Brewing System: This BrewBuilt Kettle provides the perfect foundation for your custom brewing setup, whether you're building a dedicated Hot Liquor Tank (HLT), Mash Tun, or Boil Kettle. It does not include all accessories, giving you the freedom to purchase the specific hardware you need to complete your ultimate brewing system. Major Features for Brewers: High-Quality 304 stainless steel construction Welded Dish Bottom for complete drainage - easy cleaning, no loss Integrated Tangential Whirlpool Arm for efficient hop and trub separation Built-in Cooling Jacket for rapid and controlled wort chilling High-Quality sanitary welded TC Ferrules Handles with Silicone grips to avoid burning hands Lid comes welded with TC port for CIP and other accessories down the road Kettles are raised on legs for easy access to lower ports Same Kettles used in our Next Generation BrewSculptures Wide Range of homebrew sizes - 10, 15, 20, 30, 50 gal Cooling Jacket Operating Limits Maximum Operating Pressure: 15 PSI (1.0 BAR). Always ensure your glycol chiller or liquid cooling source is regulated below 15 PSI. Unrestricted Flow Required: Keep the jacket outlet port open and unblocked during operation. Never cap or valve off the outlet return line, as fluid needs to circulate freely to prevent pressure buildup. Please Note: This kettle is designed for customization. While it includes the tangential whirlpool arm and cooling jacket, other necessary hardware—including heating elements, valves, thermowells, and clamps—must be purchased separately to build your desired brewing system.  

    $599.99 - $1,249.99

  • Blichmann Tower of Power Communication Cable

    Blichmann Tower of Power - Communication Cable

    1 review

    This cable is designed to connect the Tower of Power Control Module to a computer. This allows you to automatically control your mash profile through your PC computer. It will remotely monitor your mash, and you can create unlimited mash profiles.

    $32.99

  • Ss Brewtech - Brew Cube - Shelf - PLACEHOLDER Ss Brewtech - Brew Cube - Shelf - PLACEHOLDER

    Brew Cube | Shelf | Ss BrewTech

    Designed to fit in between legs or between feet (or casters) as a shelf on Brew Cubes. Perforated Shelf can be used to mount pumps and accessories. *Note these will not work as top plates.

    $49.95

  • Replacement Carbon Filter for BrewRO System

    Replacement Carbon Filter for BrewRO System

    Replacement carbon filter for the BrewRO System. The carbon filter should be changed every 6 to 12 months.   Only use HbrewO replacement filters on your BrewRO System, failure to do so can damage the system.

    $9.99

  • Replacement Sediment Filter for BrewRO System

    Replacement Sediment Filter for BrewRO System

    Replacement sediment filter for the BrewRO System. The sediment filter should be changed every 6 to 12 months depending on usage.   Only use HbrewO replacement filters on your BrewRO System, failure to do so can damage the system.

    $8.99

  • Anvil Brewing Thermometer - Weldless Anvil Brewing Thermometer - Weldless

    Anvil Brewing Thermometer - Weldless

    The Anvil Brewing Equipment brewing thermometer is a high quality dial thermometer, offered in an easy to install weldless model or with 1/2" NPT threads (MT591). Weldless models only require a 1/2" hole for installation! The 2.5" long stem reads accurately without getting in the way. Reads from 45-220°F (7-100°C).

    $27.49

  • Blichmann Engineering Power Adapter -14-50P

    Blichmann Engineering Power Adapter - 14-50P

    Power Adapter from Blichmann Engineering. The adapter allows the 240V BoilBoil cable with L6-30P plug to be used with a 14-50P outlet. 14-50P outlets are commonly used for charging electric vehicles, RVs and electric ranges. 1.25 ft in length.

    $69.99

  • Blichmann 1" Sanitary Bulkhead Tool Blichmann 1" Sanitary Bulkhead Tool

    Blichmann 1 in. Sanitary Bulkhead Tool

    1 review

    This is a Blichmann Spare Part. Replacement bulkhead tool for the Blichmann Fermenator. This tool is used to install the blow-off assembly.

    $5.86

  • Stainless - 1/4 in. BSP Washer Stainless - 1/4 in. BSP Washer

    Stainless BSP Washer - 1/4 in.

    Stainless steel 1/4" BSP washer. KegLand Part Number: KL13574  

    $2.79

  • Stainless - 1/2 in. BSP Internal Threaded Pipe Socket Stainless - 1/2 in. BSP Internal Threaded Pipe Socket

    Stainless Internal Threaded Pipe Socket - 1/2 in. BSP

    Female threaded pipe socket with 1/2" BSP threads.  

    $5.49

  • Grainfather G70 V2 220V Grainfather G70 V2 220V

    Grainfather G70² | All Grain Brewing System | G70 V2 | Wireless Connectivity | 220V

    PLEASE NOTE: The supplier of this product has temporarily halted shipments to addresses within the state of California. If you are a CA resident, please note your order will not be fulfilled and will ultimately be canceled. We hope to have this issue resolved with the supplier as soon as possible.   Thanks to the 70L (18.5 gal) capacity, homebrewers can produce more beer to share or commercial breweries now have a unit that's small enough for pilot testing. It also has a smart controller with built-in wireless connectivity and mobile app integration for step-by-step remote-controlled brewing. The G70² gives you everything you need in one compact package that can be used virtually anywhere. Please Note - this system comes standard with a NEMA 6-15P plug, and requires access to a 220v-240v power supply. New Features on the G70²: The G70² features a perforated grain basket and the sight glass is now integrated into the recirculation pipework. The new basket design provides an improved brewing experience with no top plate or additional pipework required, making for an even more efficient mash and an easier clean. Perforated grain basket for an improved brewing experience with no top plate or additional pipework required. Integrated sight glass is now a part of the recirculation pipework for easy volume reading. 70L of innovation, consistency and power have helped to create one of our most compelling systems to date. The inherent strength and safety capabilities of the G70² are matched by its bold, contemporary look and new smart brewing technologies. From the creators of the original award-winning all-grain brewing system, the Grainfather G70² represents the next level in brewing equipment. We’ve stepped up our game to bring you a smarter brewing system with a larger 18.5 gal capacity, improved design, wireless control, app integration and the same Grainfather signature quality guarantee. Whether you're a homebrewer looking to raise the stakes or a commercial brewery looking to bring authenticity back to your pilot batches, the G70² is your true brewing companion. It gives you everything you need in one compact package that can be used virtually anywhere. Features: Two-stage false bottom. The conical base allows a false bottom with an inner collar to sit in the recess of the base. Early testers used 21 oz of hops and saw full flow through the pump. This is very effective. Bespoke 3.2 kWh concealed conical heating element. Make the most of the power available. The element covers around 80% of the base and is mounted using a thermal paste rather than braised. This moves the heat efficiently upwards, minimizing the loss of heat to areas where it’s not needed. As it’s spread in a wide area, hot spots and scorching are very unlikely. Also, most solids settle on the false bottom, so they won’t touch the elements. As it’s concealed, it makes cleaning easy too. Integrated sight glass for easy volume readings during sparging. Instead of trying to judge the level of your preboil, you can easily sparge until you reach preboil volume. It’s also easy to clean after every brew. The sight glass cap can be replaced with the sight glass cleaning barb to easily recirculate a cleaning solution. Bottom drain below the false bottom means minimal dead space. High temperature, high flow rate, food-grade pump. With an 2.1 gal per minute flow rate, you can transfer your brew efficiently and safely. Heavy duty handles on the outside of the G70² unit. Convenient side entry recirculation. Rather than up and over, the G70² has a built in port on the side of the unit. If the pump is accidentally switched on, the wort will be safely directed back into the boiler. New rolled edge, mash plates and hop filter for increased strength and easy set up. There’s no more silicone seals, as the plates now have a smooth finish, making them more robust, hard-wearing and easy to install. Compared to the G30, the G70² is wider but not that much taller. Comparatively, the draining is still quick from the basket and there’s less likelihood of stuck sparges as the draining surface area is bigger. Safety aspects including locked in support ring, heavy duty, no slip brackets on the grain basket and protection from knocking the ball valve open. Automatic heat sensors and safety cut-out for dry boil protection. Color LCD controller screen with magnetic mounting for easy viewing from all angles and manual control. Glass lid with handle. Ball valve for sampling/draining. This runs in line with the pump so it’s particularly helpful when draining the cleaning water. The water runs out quickly, emptying the unit in no time. Huge Wort Chiller included. Despite the volume being more than double, cooling times remain around the same as the G30 thanks to a more powerful pump, efficient false bottom and bigger wort chiller to match the wider unit. The large size means it needs to be positioned away from the G70², however this is made easy with longer silicone tubing attached as standard. Lifting bar included with winch lifting hook. Use the bar for a two person lift or with a stable winch system for individual brewers to lift the grain basket. Large dual-stage hop filter provides a large surface area to allow for a hopping rate of up to 3.3 lbs, which also reduces pump load and blockages. Robust stainless steel body and excellent build quality. Specifications: 304 Grade stainless steel body 220 - 240V 18 Gal Capacity Max Grain Bill: 35 lbs Min Grain Bill: 18 lbs Powerful high flow pump: 15W

    $2,199.00

  • Blichmann BrewCommander - 240V Relay Module Blichmann BrewCommander - 240V Relay Module

    Blichmann BrewCommander™ Brewhouse Controller Relay Module

    The Relay Module is used to control multiple heating elements. The Relay Module will come with a jumper cable to wire between the relay module and the BrewCommander™ controller. 240v

    $218.99

  • Blichmann Power Controller - 120V Blichmann Power Controller - 120V

    Blichmann Power Controller (120V)

    1 review

    This amazing product is an ideal companion with Blichmann’s revolutionary BoilCoil™ immersion heaters, but it’ll also work with all manufacturer’s immersion heaters!  Blichmann’s unique modular power controller lets you precisely control the power of your electric heating element from 0-100% power.  Need to control more than one heating element for large kettles?  Simply add up to 4 additional relay modules and drive them all with one power controller.  Unlike cheap "dimmer switch" based power controllers, whose power output is not linear, the modular power controller is much easier to control the perfect boil intensity and heating rate.  This is accomplished using a tried and true industrial technique called Pulse Width Modulation (PWM).  Simply put, it controls the percentage of time the heater is energized over a very short 1 sec interval.  So turning the knob to “6” energizes the heater for 0.6 seconds, and turns it off for the remainder of the 1 sec interval.  This robust reliable technique is gentle on your heater, is extremely linear, and doesn’t create electrical noise like other techniques can.  See below for other great features. Precise linear control of power from 0-100% with a fast-acting intuitive power knob Industrial grade PWM control methodology is reliable, gentle to heating elements, and very linear Ideal for boil kettle and BIAB applications where temperature control is not needed, but precise power control is.  Note that this product does not read or control temperature Allows you to dial in an exact and repeatable boil off rate to hit your final boil volume batch after batch Perfect match for Blichmann’s BoilCoil™ electric heaters, but also works with any manufacturer’s immersion heater 30A 240V (7200W) single phase, and 20A 120V (2400W) models available L6-30 30A 240V or L6-20 120V with power cable “pigtails” available Have a large kettle with more than on heating element?  Up to 4 optional relay modules can be quickly installed allowing you to drive up to 5 heating elements simultaneously with one power controller Unique enclosure has provisions to route cables out of the back for table mounting, or out of the bottom for wall mounting.  Field changeable Integral DIN rail groove on the back allows connecting multiple controllers and relay modules together for wall or table mounting using readily available DIN mounting channels   Note: 240v pictured in reverse image. Power relay sold separately (not currently available in 120v). Mounting bracket sold separately (BL997).

    $262.99

  • Low stock! Blichmann HopRocket Draft Kit

    Blichmann HopRocket Draft kit

    This kit includes everything you need to connect your HopRocket™ to your draft system for freshly infused hop, coffee, or any flavor you may choose!

    $42.99

  • Filter Sheets - Filtrox Versafix XE 34  - 20 cm x 20 cm - PLACEHOLDER

    Filtrox Filter Sheets | 20 cm x 20 cm | 6 Micron

    Due to high demand, the 100 sheet is currently out of stock. Be the first to receive your items by placing a pre-order today. We will automatically ship this to you when we receive more inventory. 20 cm x 20 cm filter pads fit all standard 20x20 plate filters, which are typically used by home winemakers 6 Micron rating provides a rough filtration that removes large particulates, often followed by a finer filtration Rough filtration is necessary on wines with heavy sedimentation as the finer pads will clog without prefiltering Easily sterilizable via heat or steam Manufactured by Filtrox, the world's leading producer of high-quality filtration media 20cm x 20cm filter pads made for 20x20 plate filters. 6 micron pads are considered to be a "rough" filtration and are typically used to prepare the wine to be filtered by finer pads, usually either 2-3 micron or 1.5 micron depending on the winemaker's tastes and objectives. Please note that all pad filters are rated 'nominal', meaning that about 90-95% of all particulate matter at the micron rating will be filtered out. There will always be a little bit of smaller material that is also filtered out, as well as some larger material that will make it through. The filters can be sterilized by in-line steam, auto-claving, dry heat, hot water or chemical methods. We choose to run Saniclean solution through the pads followed by sterile water or a small amount of wine that is then discarded. After the solution is run through the pads, and the pads have softened, the filter will need to be re-tightened. Each pad has an entry side and an exit side, distinguishable by their different textures. The entry side is a billowy type texture, frequently called the "rough" side; and the exit side has a crosshatch pattern and is commonly called the "smooth" side. For more information on how to load filter sheets into your plate and frame filter, see our Guide to Plate Filtering. Filtrox Group is a producer of filter sheets for applications in the food and beverage industry as well as in the pharmaceutical and chemical industry. These filter sheets are manufactured of specially selected raw materials and conform to FDA and FCC regulations. Micron Rating: 4 - 9 Micron Mid Point: 6 Versafix XE 34 Filter Sheets

    $44.99 - $130.99

  • Smart Brew - eXact Smart Brew Starter kit - Water Test Smart Brew - eXact Smart Brew Starter kit - Water Test

    Smart Brew | eXact Smart Brew Starter kit | Water Test Kit

    The Smart Brew® Starter Kit comes prefigured with exactly what's needed to start testing your water for the perfect brew!  Each kit includes the eXact iDip® 525 photometer with the following eXact® Strips:  Total Hardness, Calcium Hardness, Total Alkalinity, pH, Chloride, and Sulfate.  Each kit is packed in a rugged and durable plastic case with secure fasteners and padded compartments. The eXact iDip® app is available to download for Free on Apple App Store and on Google Play app store on Android.  Compatible with iPhone, iPad, and iPod touch with the minimum iOS system version 9.0 and Android version 5.0 with Bluetooth® 4.0.   Details: Standard navy blue plastic carrying case w/ Foam includes eXact iDip® 525 Photometer Cleaning brush Instruction manual 25 tests of each pH-II, High Range Total Hardness, Calcium Hardness, Total Alkalinity, Chloride III, Sulfate Free downloadable app with pre-installed tests: pH, Free Chlorine, Total Chlorine, Total Alkalinity. Additional test parameters will need to be purchased and downloaded in-app at $4.99 each or as a bundle (Smart Brew® Bundle) for $18.99      

    $394.99

  • Tel-Tru - ND3 Digital Thermometer - 1/2" NPT - PLACEHOLDER Tel-Tru - ND3 Digital Thermometer - 1/2" NPT - PLACEHOLDER

    Tel-Tru ND3 Industrial Digital Thermometer | 1/2" NPT | 3" Face

    The Tel-Tru ND3 digital thermometer is designed to deliver industry-leading value. It is rugged and dependable for use in industrial applications, and is available in a wide range of configurations to meet customer needs. All models are NIST traceable and include a lithium battery that lasts a minimum of 8 years.* Available with a 2.5" or 4" long probe. Heavy-duty 3" 304SS hermetically sealed case Digital sensor for maximum precision Response rate of 1 second 8-year lithium battery* Temperature Range: -67 to 302°F Accuracy: ±0.4°F High-visibility 0.4" tall LCD display 316SS probe Glass lens 1/2" NPT connection Made in USA *Battery life expectancy is eight years at normal room temperature.

    $228.44

  • Quick Swivel Connector - Straight Barb Only  - 6.35mm (1/4) - Duotight Compatible Quick Swivel Connector - Straight Barb Only  - 6.35mm (1/4) - Duotight Compatible

    KegLand Quick Swivel Connector | 1/4" Straight Barb | 6.35 mm Duotight Compatible

    This straight barb in 1/4" (6.35mm) OD is only compatible with the 1/2" KegLand Quick Swivel Connector Nut. Compatible with 6.35 mm Duotight fittings. Quick Swivel Nut sold separately. KegLand Part Number: KL31554

    $3.99

  • Stainless - 1/4 in x 1/8 in Bushing

    Stainless - 1/4 in. x 1/8 in. Bushing

    2 reviews

    Stainless - 1/4 in. x 1/8 in. Bushing

    $3.29

  • Tubing - GoodYear Nutriflex (2 in) - PLACEHOLDER Tubing - GoodYear Nutriflex (2 in) - PLACEHOLDER

    GoodYear Nutriflex Tubing - 2 in.

    Food-Grade, FDA approved tubing with an outer spiral reinforcement "helix" ensures a kink-free transfer every time. Nutriflex tubing is made for transferring wine or must from container to container. The inside is smooth and without any crevasses for errant material to get caught in. Small bend radius means it will hold its shape even around tight corners. Working temperature range of -15F - 158F. Inner Diameter - 2" Outer Diameter - 2.43"    

    $89.99 - $549.99

  • Stainless - 1/2 in. x 3/8 in. BSPP Coupler Stainless - 1/2 in. x 3/8 in. BSPP Coupler

    Stainless Coupler - 1/2 in. BSPP x 3/8 in. BSPP

    Stainless steel coupler or "reducing socket". 1/2" BSPP x 3/8" BSPP. Made from stainless steel. BSP vs. BSPP BSP (or BSPT) fittings have a tapered thread and require teflon tape to form a seal between the male and female fitting. BSP fittings are generally intended to be used with their counterpart of the same thread type. ONLY 1/2" BSP fittings are compatible with US-standard NPT fittings of the same size. BSPP fittings, on the other hand, have a straight thread, require a gasket seated inside the female fitting to form a seal, and are not compatible with NPT. KegLand Part Number: KL10580  

    $3.89

  • Ss BrewTech - Glycol Chiller - 3/8 HP Ss BrewTech - Glycol Chiller - 3/8 HP

    Glycol Chiller | 3/8hp | Ss BrewTech

    Introducing the Ss Glycol Chiller 3/8 HP, which will maintain lager temps and enable crash cooling for up to 6 vessels even in relatively high ambient temperatures. We designed the chiller to integrate seamlessly with our FTSs kits to provide a complete temperature control system. Since each FTSs kit includes its own dedicated temperature controller, pump, and tubing, each vessel can be connected to the glycol chiller with its own independent loop. The parallel design of this set up offers the ability to ferment at ale temps in one vessel, and maintain precise serve or crash cooling temps in another vessel. The Glycol Chiller can also be paired with our line of Ss Brite Tanks to hold beer at serving temperatures. This system offers both flexibility and expandability for your home brewery.  Features: Pumps not included, attach up to 6 FTSs Touch kits (sold separately) Capable of crash cooling and lagering Assuming one vessel is crash cooled at a time: Chills Up to 4 - 1 BBL Chronicals, Unitanks or Brite Tanks Chills Up to 6 - 1/2 BBL, 14, or 7 gal Chronicals or Unitanks, 10 or 20 gal Brite Tanks Chills up to 6 - 14 or 7 gal Brew Buckets  Not Compatible with the FTSs Pro Series Controllers Specs: Vertical chassis layout 120 VAC 3/8 HP Compressor 3576 BTUs/Hr 10 Gallon Reservoir with Pressure Vent R290 Refrigerant Casters included Made in France Dimensions: 18" W x 18" D x 28" H  

    $1,499.00

  • Glycol System #1

    Glycol System Beer Chiller #1

    Glycol Chillers for cooling fermentations of beer and wine, and also used for maintaining temperature for draft beer dispensing. These glycol packs are perfect for controlling temperature during fermentations. They can be used with cooling plates and snakes for macro bin fermentation, as well as connected to tanks via cooling jackets. If you desire to do cold stabilization with this small chiller you will need to insulate your tanks very well and have sufficient cooling surface area in contact with the wine. A better machine for cold stabilization is our Chilly45 made by Kreyer, featuring 4x the power. Features of Glycol System #1 Digital Thermostat Digital Temperature Controller 2,300 btu/hr Compressor 1/3 hp Vertical-type pump 115V power 4.5 gallon bath capacity Max distance of glycol line is 75 feet 22-1/4" H x 17-3/8" W x 26" D 118 pounds Will cool glycol bath down to approximately 20°F

    $1,899.00

  • RAPT - Fermentation Chamber - Probe RAPT - Fermentation Chamber - Probe

    RAPT Fermentation Chamber | Replacement Temperature Probe

    Replacement temperature probe for the RAPT Fermentation Chamber. This is the standard probe that is included with the fridge. It can also be replaced with the Extension Probe which is long enough to be fed into a fermenter's thermowell. KegLand Part Number: KL26451

    $3.29

  • Low stock! Low Pressure Propane Regulator

    Low Pressure Propane Regulator

    Low pressure propane regulator converts high pressure propane to low pressure propane. Designed for use with H212 and H209 burner only. This propane regulator does not come with the hose necessary to connect to the burner. You would need to have a professional plumber do the installation. Regulates to 11" W.C. (.4 PSI). Good to about 400,000 BTUs although we can not get an exact value from the manufacturer.

    $99.99

  • BrewBuilt Bottom Drain Kettle with Grain Door - PLACEHOLDER BrewBuilt Bottom Drain Kettle with Grain Door - PLACEHOLDER

    BrewBuilt® Bottom Drain Kettle with Grain Door

    Pro-Grade Construction: Made from high-quality 304 stainless steel with a welded dish bottom for complete drainage and easy cleaning. Integrated Grain Door: For effortless and complete grain removal. Sanitary Connections: Features sanitary welded TC ferrules for leak-free, professional-grade connections. Enhanced Usability: Includes silicone-gripped handles, a TC-ported lid for CIP, and raised legs for convenient access to lower ports and grain door. Fully Customizable: The kettle arrives without fittings or valves, giving you a blank canvas to customize with your preferred accessories. Elevate your homebrewing craft with the BrewBuilt Dish Bottom Kettle, specifically designed as the perfect mash tun. This professional-grade kettle is meticulously crafted from high-quality 304 stainless steel, ensuring durability and a lifetime of flawless brews. Experience the revolutionary welded dish bottom, engineered for unparalleled complete drainage, ensuring every precious drop of wort is utilized and cleanup becomes a breeze. This specialized BrewBuilt Kettle features a convenient grain door, making the removal of spent grains incredibly easy and efficient. High-quality sanitary welded TC Ferrules provide a lifetime of leak-free use and make sanitary connections effortless, a standard in professional breweries now accessible for homebrewing. Comfort and safety are prioritized with silicone-gripped handles to protect your hands from heat. The lid comes welded with a TC port, ready for CIP (Clean-in-Place) and other future accessories. For convenient access to lower ports, the kettle is raised on sturdy legs. BrewBuilt Kettles are the same high-performance kettles used in our Next Generation BrewSculptures, guaranteeing professional-grade results. Available in a wide range of popular homebrew sizes—10, 15, 20, 30, and 50 gallons—they cater to every brewing scale. Build Your Own Brewing System: This BrewBuilt Kettle provides the perfect foundation for your custom mashing setup. It does not include accessories, giving you the freedom to purchase the specific hardware you need to build a dedicated Mash Tun. Major Features for Brewers: High-Quality 304 stainless steel construction Welded Dish Bottom for complete drainage - easy cleaning, no loss Integrated Grain Door for easy removal of spent grains High-Quality sanitary welded TC Ferrules Handles with Silicone grips to avoid burning hands Lid comes welded with TC port for CIP and other accessories down the road Kettles are raised on legs for easy access to lower ports Same Kettles used in our Next Generation BrewSculptures Wide Range of homebrew sizes - 10, 15, 20, 30, 50 gal Please Note: This kettle is designed for customization. All necessary hardware—including heating elements, valves, thermowells, and clamps—must be purchased separately to build your desired brewing system.  

    $699.99 - $1,299.99

  • Blichmann BoilCoil - 7.5 gal / 120 v Blichmann BoilCoil - 7.5 gal / 120 v

    Blichmann BoilCoil | 7.5 Gallon | 120V

    This new Blichmann Engineering innovation redefines electric heating! Unrivaled performance, speed, and simplicity. Just plug in a BoilCoil™ immersion heater for immediate, high efficiency heat. Ideal for indoor brewing and a perfect companion for your BoilerMaker­™ brew pot. It is easily installed in your previously purchased BoilerMaker™ pot, or most other manufacturers pots by drilling two small 5/8" holes with our handy drill template. We include a "plug and play" 12 ft factory wired cable with a molded twist-lock plug on one end, and our custom removable plug on the other end. Hot, fast, and easy. Just the way you like it. Features: Each BoilCoil™ is engineered to perform optimally in your BoilerMaker™ brew pot for consistent heating performance, boil quality, and boil-off rates. Removable custom engineered plug means cleaning is a snap - no dangling power cord tethered to your pot! Coil configuration hugs the wall of the pot to encourage convective boil characteristics to drive off DMS and other volatiles and doesn't interfere with whirlpooling The BoilCoil™ includes a "plug and play" 12 ft factory wired cable. LESS THAN Ultra low watt density means NO chance of scorching, and dry-fire capable (although we certainly don't recommend this!). Simple installation requires drilling only two small 5/8" holes with our handy drill template. No risky welding or cutting massive holes in your pot to install, and features a professional and reliable connection and sealing system engineered specifically for homebrew kettles. The BoilCoil™ will fit in most competitive pots too! See data tab for dimensional drawing. Couple with the electric BrewCommander™ controller for the ultimate in temperature control. Kettle Size: For 7.5 gal Boilermakers™ Rated Voltage (VAC): 120 v Recommended GFCI Breaker Size: 20 amp Power (W): 2000 W

    $152.99

  • Blichmann Tower of Power Extension Cord - 240 v

    Blichmann Tower of Power Extension Cord - 240 v

    Extension cord for the 240V Blichmann TOWER of POWER™. 12 feet in length. 30A, L6-30P

    $32.99

  • Stainless Steel Splicer - 1/4 in Barb to 5/16 in Barb

    Tubing Splicer | Stainless Steel | 1/4 in Barb to 5/16 in Barb

    2 reviews

    Stainless steel splicer designed for connecting two different sizes of tubing together. The smaller barb will accept 3/16 in or 1/4 in ID tubing (typical to homebrew systems) on one side, and the larger barb will accept 5/15 in or 3/8 in ID tubing common to commercial systems. Sold individually.

    $2.99

  • Stainless - Half Coupler 1 in.

    Stainless Half Coupler - 1 in.

    Stainless Half Coupler with 1" Female Pipe Thread. Half couplers have thread for insertion from one side only.

    $5.49

  • Stainless - 1 in. x 3/4 in. BSPP Coupler Stainless - 1 in. x 3/4 in. BSPP Coupler

    Stainless Coupler - 1 in. BSPP x 3/4 in. BSPP

    Stainless steel coupler or "reducing socket". 1" BSPP x 3/4" BSPP. Made from stainless steel. BSP vs. BSPP BSP (or BSPT) fittings have a tapered thread and require teflon tape to form a seal between the male and female fitting. BSP fittings are generally intended to be used with their counterpart of the same thread type. ONLY 1/2" BSP fittings are compatible with US-standard NPT fittings of the same size. BSPP fittings, on the other hand, have a straight thread, require a gasket seated inside the female fitting to form a seal, and are not compatible with NPT. KegLand Part Number: KL10566  

    $6.59

  • Stainless - 3/8 in. x 1/4 in. BSPP Coupler Stainless - 3/8 in. x 1/4 in. BSPP Coupler

    Stainless Coupler - 3/8 in. BSPP x 1/4 in. BSPP

    Stainless steel coupler or "reducing socket". 3/8" BSPP x 1/4" BSPP. Made from stainless steel. BSP vs. BSPP BSP (or BSPT) fittings have a tapered thread and require teflon tape to form a seal between the male and female fitting. BSP fittings are generally intended to be used with their counterpart of the same thread type. ONLY 1/2" BSP fittings are compatible with US-standard NPT fittings of the same size. BSPP fittings, on the other hand, have a straight thread, require a gasket seated inside the female fitting to form a seal, and are not compatible with NPT. KegLand Part Number: KL10597  

    $2.79

  • RAPT - PC Heat Resistant Shelf Tray (60mm deep) RAPT - PC Heat Resistant Shelf Tray (60mm deep)

    RAPT Fermentation Chamber | Polycarbonate Heat Resistant Shelf Tray

    Heat resistant shelves for your brand new RAPT Fermentation Chamber. Can be used for trays of mushrooms or seed sewing with added grow lights. It can also be used as a humidity tray if you require a humid environment for your project. 60 mm (2.3") deep. KegLand Part Number: KL25553    

    $43.99

  • BrewBuilt - Domed Lid for Bottom Drain Kettles - PLACEHOLDER BrewBuilt - Domed Lid for Bottom Drain Kettles - PLACEHOLDER

    Domed Lid for BrewBuilt® Bottom Drain Kettles

    Integrated 2" TC Port: Seamlessly connect a condenser or still top to recover hop oils, distill water, or experiment with spirits, transforming your kettle into a versatile system. Optimal Vapor Collection: The raised dome design facilitates efficient vapor collection and separation, ensuring high-quality distillation and enhanced performance. Secure & Durable Design: Crafted for a precise fit and a secure seal, this domed lid ensures optimal function and lasting durability for all your brewing and distilling needs. Bring your brewing to the next level with the BrewBuilt Domed Lid for Dish Bottom Kettles. This essential upgrade features a centered 2" tri-clamp (TC) port, giving you the flexibility to easily add a condenser or still top. Whether you're looking to recover hop oils, distill water, or experiment with spirits, this domed lid is designed for a seamless fit and optimal performance. The raised dome design allows for proper vapor collection and separation, while the high-quality construction ensures a secure seal. Transform your BrewBuilt kettle into a multi-functional powerhouse and unlock a new world of brewing possibilities.  

    $119.99 - $254.99

  • Filter Sheets - Filtrox Versafix XE 104  - 40 cm x 40 cm - PLACEHOLDER

    Filtrox Filter Sheets | 40 cm x 40 cm | 0.7 Micron

    40 cm x 40 cm filter pads fit all standard 40x40 plate filters, which are typically used in professional applications 0.7 Micron for ultra-fine polishing of beverages or for preparing hard to filter beverages to go through a sterile cartridge filter Easily sterilizable via heat or steam Manufactured by Filtrox, the world's leading producer of high-quality filtration media 40cm x 40cm filter pads made for 40x40 plate filters. 0.7 micron pads are for ultra-fine polishing of the beverage, or for preparing hard to filter beverages to go through a sterile cartridge filter. Please note that all pad filters are rated 'nominal', meaning that about 90-95% of all particulate matter at the micron rating will be filtered out. There will always be a little bit of smaller material that is also filtered out, as well as some larger material that will make it through. The filters can be sterilized by in-line steam, auto-claving, dry heat, hot water or chemical methods. We choose to run Saniclean solution through the pads followed by sterile water or a small amount of beverage that is then discarded. After the solution is run through the pads, and the pads have softened, the filter will need to be re-tightened. Each pad has an entry side and an exit side, distinguishable by their different textures. The entry side is a billowy type texture, frequently called the "rough" side; and the exit side has a crosshatch pattern and is commonly called the "smooth" side. For more information on how to load filter sheets into your plate and frame filter, see our Guide to Plate Filtering. Filtrox Group is a producer of filter sheets for applications in the food and beverage industry as well as in the pharmaceutical and chemical industry. These filter sheets are manufactured of specially selected raw materials and conform to FDA and FCC regulations. Micron Rating: 0.5 - 0.8 Micron Mid Point: 0.7 Versafix XE 104 Filter Sheets Wine Use: Ultra-fine polishing Max. Recommended Flow Rate: 15 gal/hr (56 L/hr) Max. Recommended Pressure Differential: 17 psi (1.2 Bar) Cold Brew Coffee Use: Very fine filtration Max. Recommended Flow Rate: 15 gal/hr (56 L/hr) Max. Recommended Pressure Differential: 36 psi (2.5 Bar)

    $107.99 - $323.99

  • Filter Sheets - Filtrox Fibrafix AF 130  - 20 cm x 20 cm - PLACEHOLDER

    Filtrox Filter Sheets | 20 cm x 20 cm | 0.5 Micron

    20 cm x 20 cm filter pads fit all standard 20x20 plate filters, which are typically used by home winemakers 0.5 Micron pads remove 99.999% of bacteria to promote sterility in the bottle Easily sterilizable via heat or steam Manufactured by Filtrox, the world's leading producer of high-quality filtration media 20cm x 20cm filter pads made for 20x20 plate filters. Pads rated 0.5 micron remove 99.999% of bacteria. This pad is the right choice when you want to promote sterility in the bottle, although do please note that the pad does not remove 100% of bacteria - only a cartridge filter can do so. The filters can be sterilized by in-line steam, auto-claving, dry heat, hot water or chemical methods. We choose to run Saniclean solution through the pads followed by sterile water or a small amount of wine that is then discarded. After the solution is run through the pads, and the pads have softened, the filter will need to be re-tightened. Each pad has an entry side and an exit side, distinguishable by their different textures. The entry side is a billowy type texture, frequently called the "rough" side; and the exit side has a crosshatch pattern and is commonly called the "smooth" side. For more information on how to load filter sheets into your plate and frame filter, see our Guide to Plate Filtering. Filtrox Group is a producer of filter sheets for applications in the food and beverage industry as well as in the pharmaceutical and chemical industry. These filter sheets are manufactured of specially selected raw materials and conform to FDA and FCC regulations. Micron Rating: 0.4 - 0.6 Micron Mid Point: 0.5 Fibrafix AF 130 Filter Sheets

    $49.99 - $599.99

  • Lenticular Filter Module - Filtrox Fibradisc AF 130 - 12 in. / 16 lenses DOE/DOR Lenticular Filter Module - Filtrox Fibradisc AF 130 - 12 in. / 16 lenses DOE/DOR

    Filtrox Lenticular Filter Module | 12" | 0.45 Micron

    12" filter module for use with 12" stainless steel lenticular filter housings 0.45 Micron pads remove 99.999% of bacteria to promote sterility in the bottle Manufactured by Filtrox, the world's leading producer of high-quality filtration media Filtrox filter modules are high-performance filtration solutions designed for use with stainless steel lenticular filter housings. These modules deliver reliable, efficient filtration for a wide range of liquids in food and beverage production including wine, beer, cider, spirits, cold brew coffee, and more. Compared to plate filters and filter sheets, lenticular filter housings and filter modules offers an airtight, sealed system with no dripping or leakage, ensuring your liquid remains protected and uncontaminated.  Filter modules are easy to install and provide consistent results, making them ideal for demanding filtration applications. Filtrox Group is a producer of filter media for applications in the food and beverage industry as well as in the pharmaceutical and chemical industry. These filter modules are manufactured of specially selected raw materials and conform to FDA and FCC regulations. Micron Rating: 0.4 - 0.6 Micron Mid Point: 0.5 Filtration Area: 19.3 ft² (1.8 m²) Number of Lenses: 16 Fibradisc AF 130 Filter Module Wine Use: General sterile filtration Max. Recommended Flow Rate: 167 gal/hr (630 L/hr) Max. Recommended Pressure Differential: 17 psi (1.2 Bar) Fruit Wine or Fruit Juice Use: Cold sterile filtration Max. Recommended Flow Rate: 167 gal/hr (630 L/hr) Max. Recommended Pressure Differential: 17 psi (1.2 Bar) Beer Use: Yeast and bacteria removal Max. Recommended Flow Rate: 57 gal/hr (216 L/hr) Max. Recommended Pressure Differential: 15 psi (1.0 Bar) Please Note: The filter module, lacking a PES layer, is for clarification purposes only and does not provide sterile filtration for 100% bacteria removal.

    $394.99

  • Low stock! Lenticular Filter Module - Filtrox Versadisc XE 64 - 12 in. / 16 lenses DOE/DOR Lenticular Filter Module - Filtrox Versadisc XE 64 - 12 in. / 16 lenses DOE/DOR

    Filtrox Lenticular Filter Module | 12" | 2 Micron

    12" filter module for use with 12" stainless steel lenticular filter housings 2 Micron rating are for general clarifying of wine and fine filtration of beer, seltzer and cold brew Manufactured by Filtrox, the world's leading producer of high-quality filtration media Filtrox filter modules are high-performance filtration solutions designed for use with stainless steel lenticular filter housings. These modules deliver reliable, efficient filtration for a wide range of liquids in food and beverage production including wine, beer, cider, spirits, cold brew coffee, and more. Compared to plate filters and filter sheets, lenticular filter housings and filter modules offers an airtight, sealed system with no dripping or leakage, ensuring your liquid remains protected and uncontaminated.  Filter modules are easy to install and provide consistent results, making them ideal for demanding filtration applications. Filtrox Group is a producer of filter media for applications in the food and beverage industry as well as in the pharmaceutical and chemical industry. These filter modules are manufactured of specially selected raw materials and conform to FDA and FCC regulations. Micron Rating: 1.5 - 3 Micron Mid Point: 2 Filtration Area: 19.3 ft² (1.8 m²) Number of Lenses: 16 Versadisc XE 64 Filter Module Wine Use: Clarifying filtration Max. Recommended Flow Rate: 286 gal/hr (1,080 L/hr) Max. Recommended Pressure Differential: 29 - 36 psi (2.0 - 2.5 Bar) Spirits Use: Fine filtration of cognac and whiskey chill haze removal Max. Recommended Flow Rate: 239 gal/hr (900 L/hr) Max. Recommended Pressure Differential: 22 psi (1.5 Bar) Beer Use: Fine filtration, with fewer yeast cells Max. Recommended Flow Rate: 71 gal/hr (270 L/hr) Max. Recommended Pressure Differential: 22 psi (1.5 Bar) Seltzer Use: Fine filtration of seltzer base Max. Recommended Flow Rate: 334 gal/hr (1,260 L/hr) Max. Recommended Pressure Differential: 36 psi (2.5 Bar) Cold Brew Coffee Use: Fine filtration Max. Recommended Flow Rate: 239 gal/hr (900 L/hr) Max. Recommended Pressure Differential: 29 psi (2.0 Bar)

    $231.99

  • Power Adapter for MT353 Scale

    Power Adapter for MT353 Scale

    Never need batteries again for your High Precision Series Scale. For the American Weigh product AMW LB-501, our MT353. Input: 120V at 60Hz Output: 9V DC at 100mA

    $12.99

  • Smart Brew - eXact Smart Brew Professional Kit - Water Test Smart Brew - eXact Smart Brew Professional Kit - Water Test

    Smart Brew | eXact Smart Brew Professional Kit | Water Test Kit

    The eXact iDip® Professional Test Kit is the latest generation test kit that combines two state of the art water quality test instruments. The first is the revolutionary Level 1 NSF/ANSI-50 Certified eXact iDip® Smart Photometer System® which integrates patented 2–way wireless communication with any compatible iOS or Android smart device and has the potential to test over 40 water parameters. The second is the NEW eXact® pH+ Meter system which capitalizes on electrochemistry technology combined with Bluetooth connectivity.   Preconfigured kit comes with exactly what's needed to start testing (excluding app software). Packed in a rugged and durable plastic case with secure fasteners and padded compartments. Compatible with iPhone, iPad, and iPod touch with the minimum iOS system version 9.0 and Android version 5.0 with Bluetooth® 4.0.     Details: Standard navy blue plastic carrying case w/ Foam includes eXact iDip® 525 Photometer Cleaning brush Instruction manual 25 tests of each High Range Total Hardness, Calcium Hardness, Total Alkalinity, Chloride III, Sulfate eXact® pH+ Meter System pH, TDS, Salinity, Conductivity, and Temperature Free downloadable app with pre-installed tests: pH, Free Chlorine, Total Chlorine, Total Alkalinity. Additional test parameters will need to be purchased and downloaded in-app at $4.99 each or as a bundle (Smart Brew® Bundle) for $18.99    

    $744.99

  • Low stock! Tilt Pro Hydrometer and Thermometer - Pink

    Tilt® Pro Hydrometer and Thermometer - Pink

    New and improved with the professional brewer in mind, the Tilt Pro is the bigger, badder version of the original Tilt Hydrometer. With three times the volume and weight as the original unit, the Tilt Pro's larger size allows for more than double the batter life. With preinstalled Energizer® AA lithium batteries, the Pro will stay powered for up to 5 years depending on usage. So much time you may forget your Tilt actually runs on a battery! The extra size and weight come with an added bonus: improved specific gravity stability at high krausen, so you will see a steadier read-out on your iPhone, Android, or Raspberry Pi. In addition, Tilt Pro has boosted the range with a high-gain antenna that in testing increased range by 20% vs. the original Tilt. Now you can see your Tilt through thicker heads of foam and heavier stainless steel walls. To top it off they've included the extra decimal of precision available from the sensors and to the read-out so there are now decimal degrees Fahrenheit as well as higher resolution Celsius. Specific gravity now reads out to the 10,000th place (for example 1.0000). You can now see fermentation activity dropping less than a brewer's point per day. In all they've made several adjustments we believe the craft beer professional (and serious home brewer) is sure to appreciate. Specifications: Size: 1.7" (43mm) diameter (max) by 5.4" (140mm) tall Weight: 5.4 ounces (153g) Specific Gravity Measurement Range: 0.9900 - 1.1200 Specific Gravity Resolution: 0.00001 Temperature Measurement Range: 0°F - 140°F (-17.8°C - 60°C) Note: Installed lithium batteries include a built in PTC (heat activated fuse) that will temporarily cut power if batteries exceed 140°F. Temperature resolution: 0.1°F (0.1°C) Absolute Maximum Temperature Range: -40°F to 185°F (-40°C to 85°C) Battery: User-replaceable, 2x 1.5v AA battery (Li/FeS2), widely sold as "Energizer®  AA Ultimate Lithium".  

    $250.00

  • Brass - 1/2 in.x1/8 in. bushing

    Brass - 1/2 in. MPT x 1/8 in. FPT Bushing

    Brass - 1/2" MPT x 1/8'' FPT bushing

    $2.49

  • Brass - 1/8 in. fpt x 1/4 in. mpt Bushing

    Brass - 1/8 in. FPT x 1/4 in. MPT Bushing

    Brass - 1/8'' fpt x 1/4'' mpt Bushing

    $1.99


You have seen 864 out of 987 products

Frequently Asked Questions

Beer Brewing Equipment Collection Article +

Home Brewing Beer Making beer at home is easy, rewarding and can lead to some amazing friendships & interactions. Like most people I started brewing at home with beer brewing kit from MoreBeer! The kit came with everything I needed to brew a batch of beer at home. Typical of most homebrewing starter kits, the equipment and beer recipe ingredients where for extract brewing. I know a lot of people that just dived right into all-grain brewing and there is nothing wrong with that approach. For myself and what I recommend to others as well is starting with extract brewing. It allows you to focus on a few steps in the brewing process as you are essentially starting from the boil. I think the old saying crawl, walk, run applies beautifully to learning to brew and most anything in life. By starting with extract you can focus on, in my opinion the two most important things in brewing; cleaning / sanitation and fermentation. Not to say can’t jump into all grain brewing and give these topics the respect they deserve. It’s just a lot easier to focus on and learn a few things at a time. After all you don’t eat an entire pizza at once, you have one slice at a time. Once you have brewed a few batches of extract beer a good natural progression is to try what they call a mini-mash. This essentially allows you get some of your sugars from mashing grains but still back it up with liquid or dried malt extract. Aside from allowing you to learn the brewing process in steps, it also allows you to upgrade your brewing system over time. Purchasing a complete all grain system can be expensive and if you’re just starting a new hobby it’s nice to spend as you go. However with systems like the RoboBrew/BrewZilla, getting started with all-grain brewing has never been more affordable and accessible.  When I started brewing these type of systems were not available though. Either way, most extract brewers move to all-grain brewing; as it allows you to take complete control over your beer recipe and intern the finished beer your making. Another topic worth mentioning is the social aspect of beer & brewing. We all know beer is a social drink, heck this country “The United States” was founded in pubs by revolutionary individuals. Sure it’s fun to sit back and enjoy a pint of a beer you made. But it’s even funnier to share a pint with friends and family. That leads to another great way to learn and improve your brewing, joining a homebrew club! For the first few years of my brewing career I brewed alone and only shared by creations with family and friends. It wasn’t until I was selling some homebrew equipment on the internet that I was directed towards joining a homebrew club. The person purchasing equipment from me asked if I was aware of the local homebrew club. It really never crossed my mind to seek out or join a club, but let me tell you; it was one of the best recommendations and things I could have ever done. Not only do you meet and network with likeminded brewers like yourself; the friendships that have come from the club have not only enriched my life it has my family as well. I know being social may not be for everyone, but meeting and speaking with other brewers is a great way to get More! out of an already amazing hobby! Regardless of your brewing path, be it extract or all grain or alone or with others; always remember to keep learning and have fun brewing, cheers!

BEER Collection Article +

What is Beer? Beer is a delicious alcoholic drink that is made by yeast, fermenting a malt sugar & water mixture that is typically flavored with hops. It has been brewed since the dawn of civilization, in fact, it’s even been credited for saving the world by some scientists and historians. The earliest evidence of beer production dates back to about 3500 BC. However, there is speculation that it was being produced as far back as 10,000 BC when humans first started farming malts. The ancient Sumerian text "The Hymn to Ninkasi" is a prayer but could also be considered the earliest written beer recipe. For thousands of years fermented malt beverages were being consumed by numerous civilizations, but none of them really resembled what we know as Beer today.  It wasn’t until 1516 AD in Bavaria when the Reinheitsgebot (Beer purity law) was adopted that it started to look, smell and taste like the alcoholic drink we all know and love today. The Reinheitsgebot is actually credited as the oldest food-quality regulation in history and is still in use to this day. It states that the only allowed ingredients in Beer are water, hops and malted barley.  Today, Beer is the third most popular drink in the world with only water and tea in front of it. Cheers to a long history, a bright future and another round of our favorite drink, BEER! Types of Beer One of the reasons it's is so popular is that there is literally something for everyone. Beer styles can range from sweet to bitter or even sour and everything in between. Beer is commonly categorized into two varieties: Ales and Lagers . An Ale is produced with a top fermenting yeast called Saccharomyces cerevisiae. This strain of yeast typically clumps together and rises towards the top of the fermenter. The recommended fermentation temperature range for ale yeast is between 15–25°C (59–77°F). Ale yeast is known for its higher ester production that is commonly described as “Fruity” and comes across as apple, pear, pineapple, etc. A Lager is cool fermented and produced with a bottom fermenting yeast called Saccharomyces pastorianus. This strain is typically fermented around 7–12°C (45–54°F) and then aged at even cooler temps for several weeks or up to several months. The original German word lager means “storehouse” representing this cold storage step, but now the term is synonymous with a beer style and not the literal interpretation. Less popular than the two previous styles, but none less delicious, is the Lambic styles of Belgium , also called “Wild” or “Mixed Fermentation” in regions outside of Belgium. These styles are fermented with a Saccharomyces strain of yeast as well as Bretttanomyces and Lactobacillus bacteria. This use of bacteria gives them a sour or “funky” taste. These three high level classifications are only the tip of the iceberg when it comes to beer styles. In fact, there is an organization called the BJCP ( Beer Judge Certification Program ) that was founded in 1985 to encourage the knowledge and understanding of the world’s diverse styles. As of their last published style guidelines, there are 34 top level styles with over 100 substyles categorized. And with how popular craft beer has become lately, this list of recognized styles will only continue to grow. Making your own Beer If you found this page and read your way down to this section you obviously love and enjoy beer. In our experience one of the most enjoyable beer is the one you made yourself. Not only is it very rewarding and enjoyable it’s super easy to get started making your own beer at home . You can start with just a few pieces of brewing starter equipment and make amazing beer. Just as types can be boiled down (pun intended) to two high level classifications, so can brewing beer. These types are called Extract Brewing and All Grain Brewing . Extract brewing is what most home brewers start with due to it requiring less equipment and fewer process steps overall. With extract brewing you primarily just need a boil kettle and a fermenter . A majority of the malt sugars you will be fermenting come from an “Extract ”, LME ( Liquid Malt Extract ) or DME ( Dried Malt Extract ) hence the name. With all grain brewing you need a few more pieces of equipment as you will be creating your own malt sugars from scratch using crushed malted grains. In most traditional all grain brewing systems you have three vessels, a HLT (Hot Liquor Tank), MT (Mash Tun) , BK (Boil Kettle) and a Fermenter. There is also a hybrid approach called BIAB (Brew In A Bag) that allows you to perform an all-grain brew in a single vessel. With extract brewing, a typical brew day takes about 2-3 hours from start to finish, whereas all grain brewing typically takes about 4-6 hours. Both types of brewing can create amazing results and have different advantages to them. To learn More! about brewing in general click the Brewing button below.

Login

Forgot your password?

Don't have an account yet?
Create account