Yes it will you may need a different top plug but it does a good job chilling beer.

The bung or stopper is not the same size as the Fermonster #10 stopper the Anvil Cooling System comes with a #7 stopper with 4-holes in it and that will be your issue with this system out of the box. If you’re not opposed to some diy drilling into a #10 stopper the main items will work with your fermentation vessel and almost any other fermenter. Hope this helps your decision on buying it it works great in my opinion.

If you are using an ice water or colder reservoir you will be able to crash down to near freezing temperatures for lagering. It will take a lot of monitoring to make sure your cooling reservoir stays cold enough to maintain that temperature for more than a few days.

Yes! You can create a siphon and use gravity to transfer the beer. The exact steps are: 1. Lift Keg 1 onto a table or counter top. Leave Keg 2 on the floor. 2. On Keg 1 open the pressure relief valve and keep it open. 3. Attach beer line to Keg 1. 4. Attach beer line to Keg 2. 5. Open the pressure relief valve on Keg 2 and keep it open. The beer should start flowing pretty easily but you can always start it manually or with some sort of vacuum.