Works great in my ferm freezer with the inkbird-308 wifi. Heats nice and steady to keep the freezer near 70 in my cold basement

Versitile simple works on an anvil bucket nicely. Keep it simple stupid.

Looks like it will work great in the laggering/serving fridge! Find out for sure after I have something to lager in there and some cold weather!

The Glycol Chiller Adapter has worked great with my Grainfather GC2 I'm using it on a Brewtools Miniuni 30+. I mounted the heat pad on the bottom and it works well it will easily heat 6 gallons to about 20 degrees above room temperature.

Great equipment and reliable

The obvious question: Why spent this kind of money on a temp controller when you can get a $40 Inkbird? Answer: Programmability I wanted something where I could have very slow gradual cooling of my lagers. This guy does it well and not sure what else out there can do this at a consumer price point. Remote access via the web is a nice plus many other bells & whistles to geek out on if that's your thing. I don't care about integration (or lack thereof) with other KegLand products so that's a non-issue. Software is a bit buggy at times but is well supported and firmware updates are occasionally rolled out. If you want to do something more than just hold a fixed temp or cold-crash this is your unit.

I connected this to my inkbird and it's working great. The velcro strap lasted for 1 batch so keep some bungy chords handy.

I don't have a chiller yet and I only recently got a pump. Why did I buy this? Well I wanted the option to cool when I expand my operation later. Most importantly though I wanted to transfer wort straight from the boil to the fermenter and cool in the fermenter prior to pitching. This works great! An added benefit is just post-boil I can do a whirlpool prior to transfer and leave 99% of my trub behind! Try that with an immersion chiller! I have 2 mini Brew Buckets and if I'm doing 2 different brews (which is normal on a brew day) I can cool one pop this off and the other lid on then swap this over to the other bucket and cool that too! I'm sure I'll get another when I get a chiller but for my application one is working great!

First use with beer after "testing" with water. Had set high temp cuttoff at 68F with +- set at 1F. Woke up to fermentation temp of 75F (no longer heating anyway) Air temp in room never got above 70F. Will have to see where it stabilizes today but a little dissapointed so far.

It would be nice to have smaller packaging (at a lower price point) since you dilute the PG with water and a gallon of 100% PG will give you many fills if you use a Brewbuilt Icemaster 2 glycol chiller and a Brewbuilt X2 jacket conical (I have a 14 gal model). That said the quality of the glycol appears excellent and provides the ability to chill the glycol/water mix to a low temp for cold-crashing at the end of fermentation.

I'm almost finished brewing a Best Bitter using this to control the temperature and it is working great! Another great product at a great price.

I like the idea of having heating and cooling in 1 unit. I still need to check the accuracy of this since it appears to be a different reading than my Thermapen Mk4

neck of carboy and stopper must be dry Then it might seal.

More beer did a price match for a hard to get item they're always trying to please the customer.

used with small fridge to control carboy temp

I'm so glad I got the chance to buy this

I'm so glad I got the chance to buy this

This is well made and performs perfectly. My only complain it minor. It does not fit snuggly around a glass carboy. But it is easily remedied with Duct tape.

Works as advertised. Very easy to use.

Works great in my ferm freezer with the inkbird-308 wifi. Heats nice and steady to keep the freezer near 70 in my cold basement

Works great. Paired it with a ferm wrap in my chest freezer for ferm temp control.

This fermwrap has been exceptional at keeping my fermentation temps where they need to be. Paired with an Inkbird controller thermowell and sitting in a mini fridge I am able to dial in my temps +\- 1 degree.

Works great in my ferm freezer with the inkbird-308 wifi. Heats nice and steady to keep the freezer near 70 in my cold basement

This fermwrap has been exceptional at keeping my fermentation temps where they need to be. Paired with an Inkbird controller, thermowell, and sitting in a mini fridge, I am able to dial in my temps +\- 1 degree.

I have to do my stuff in a garage and in Colorado the temperatures in the winter are too conducive to fermentation. I've had aa 5 Gal glass carboy fermenting for over a month now and it still isn't complete. I put this on about 3 days ago and the fermentation picked back up and I may be done with this batch in a couple of days.

Perfect for controlling temps in my fermentation chamber

It seems to work well enough. The only issue I have is that it doesn't come with anything to hold it on the vessel. Since it doesn't wrap all the way around it could use some sort of strap.

It seems to work well enough. The only issue I have is that it doesn't come with anything to hold it on the vessel. Since it doesn't wrap all the way around it could use some sort of strap.