I have these on 4 fermenter buckets and they have worked perfectly for several years with zero leaks. Gasket goes on the outside and don’t over-tighten. Highly recommended!

I was tired or siphoning beer out of my big mouth bubbler and after drilling a hole this was the answer.

Works really nice, it didn't leak and allows me to turn the spigot 90 degrees without loosening up the fitting nut.

Good seal. Roatates smoothly. Good flow and volume. The sediment block was not the reason I bought this, but I can see it would work well.

I bought two of these for two new Fermonster fermenters. They only come with ONE washer. On the first fermenter I had the washer on the inside, and it leaked. I repositioned it, and it leaked. I took it apart and tried again, and it leaked. I took it apart and moved the washer to the outside, and it sealed the first time. Two weeks later I readied the next fermenter and started with the washer on the outside. It sealed the first time. I still have concerns as these house long term sours. Conclusion - On Fermonster fermenters you’ll want to use the washer on the outside. Knock on More Beer - How much would it cost to have this manufactured with two washers? I’m guessing less than $0.05. I would be more than willing to pay a little extra for something that has ALL the parts needed to function safely and properly. Someone has to know there is a problem here, and it should be fixed on their future purchase orders to their supplier.

this spigot was designed to prevent the sediment or true from being transferred, if your location is too high it may hold back too much clear liquid

This leaks less and is more sturdy than the other plastic spigot available on MoreBeer.It also rotates, which can be nice, but difficult to clean.The "sediment block" feature is useless, since sediment will still accumulate inside the spigot, making it more difficult to get a clear sample.I would pay for something better quality than this.... Hint, hint.

Attached to bucket with the whole already cut. works great. Hols is only about 1 inch. Sediment block can get clogged though.

Works nicely. Go for it.

Ben using these since they became available. Love them.

Was kind of disappointed that the spigot didn't come with a rubber washer and o-rings.

Don't bother with the old design. I went through a number of those and they all broke off after awhile. The old one doesn't rotate and you have to be extra careful with it, if it's too tight. This one is a much better design. It rotates and you can easily line it up. No hassles. It just works