I had to rinse 1000 bottles. this worked well once I fabricated a mounting to inside of bucket so I could use garden hose. This saved time and reduced work needed for big job

Had an old brass bottle washer that I bought in the nineties. It worked fine. So what if the actuator bends or comes out? Or you get squirted in the face every now and again. Or the pipes rattle a bit. It finally broke thank goodness. The stainless steel model is so much better. Doesn't leak. Pipes don't rattle. Glasses stay clean. And you can rinse out your hoses.

Had an old brass bottle washer that I bought in the nineties. It worked fine. So what if the actuator bends or comes out? Or you get squirted in the face every now and again. Or the pipes rattle a bit.It finally broke, thank goodness.The stainless steel model is so much better. Doesn't leak. Pipes don't rattle. Glasses stay clean. And you can rinse out your hoses.

This is needed if you are routinely bottling your beer from used bottles. It saves a lot of time.

This is needed if you are routinely bottling your beer from used bottles. It saves a lot of time.

Great spraying action. Good sturdy design too!

Great spraying action. Good sturdy design too!

Ordered two but one was defective. It was promptly replaced free of charge without any additional shipping. I have several of these and I am very pleased much better than the copper style.

Ordered two , but one was defective. It was promptly replaced free of charge without any additional shipping. I have several of these and I am very pleased, much better than the copper style.

Works great. Priced great

Works great. Priced great

It quickly squirts a solid stream of water into the back of even 5 gallon carboys making a triple rinse quick with minimal water. My only complaint is that it continued to drip a lot when not in use.

It quickly squirts a solid stream of water into the back of even 5 gallon carboys, making a triple rinse quick with minimal water. My only complaint is that it continued to drip a lot when not in use.

I had to rinse 1000 bottles. this worked well once I fabricated a mounting to inside of bucket so I could use garden hose. This saved time and reduced work needed for big job

I had to rinse 1000 bottles. this worked well once I fabricated a mounting to inside of bucket so I could use garden hose. This saved time and reduced work needed for big job

Produces unbelievable pressure for inner bottle washing - including more than enough for larger bottles like bombers and growlers. I wouldn't bottle again without one.

Produces unbelievable pressure for inner bottle washing - including more than enough for larger bottles like bombers and growlers. I wouldn't bottle again without one.

I do not know of any way easier and faster than using this to clean bottles. works great on really dirty bottles with heavy build up, after a few seconds completely clean, highly recommended.

This thing is great for making sure your bottles of all sizes are free of dust or bugs or whatever before you sanitize them prior to bottling. No leaks. Works great.

I do not know of any way easier and faster than using this to clean bottles. works great on really dirty bottles with heavy build up after a few seconds completely clean highly recommended.

This thing is great for making sure your bottles of all sizes are free of dust or bugs or whatever before you sanitize them prior to bottling. No leaks. Works great.

This bottle washer is the best I've used so far. Much better than the chattering, leaky brass model that most places sell. Highly recommended!

This bottle washer is the best I've used so far. Much better than the chattering leaky brass model that most places sell. Highly recommended!

Got this when I started brewing after listening to my friends complain about scrubbing carboys with a brush. It works great and worth the money. Will get off the most stubborn stuck on krausen residue from the inside of a carboy, most of the time at least. Its even better for cleaning bottles. Had a few with dried on residue at the bottom, took that right off.

Got this when I started brewing after listening to my friends complain about scrubbing carboys with a brush. It works great and worth the money. Will get off the most stubborn stuck on krausen residue from the inside of a carboy most of the time at least. Its even better for cleaning bottles. Had a few with dried on residue at the bottom took that right off.