Detecting your location...
Detecting your location...
$25 off $200 — Draft & Kegging Sale On qualifying Draft & Kegging items — ends Monday 11:59pm PST
Shop Now
Brewing Equipment Category
Homebrew Equipment

Brew Better Beer with Pro-Level Gear

Equip your home brewery without breaking the bank. From heavy-duty mashing kettles to precise transfer pumps, we have exactly what you need to craft the perfect pint.

  • Free Shipping on qualifying high-quality gear orders over $59.
  • Ready-to-Brew Kettles designed for immediate, highly effective brewing.
  • Fast & Efficient Cooling using our premium wort chillers to prep for yeast.
  • Effortless Liquid Transfers with our self-priming and magnetic drive pumps.
Step 1

Mash & Boil

Extract rich flavors and boil your wort using our heavy-duty standard or modified kettles and high-output burners.

Step 2

Chill & Transfer

Rapidly drop the temperature with a wort chiller, then use a magnetic drive pump to seamlessly move your beer into a fermenter.

Step 3

Ferment & Enjoy

Pitch your yeast, allow the fermentation magic to happen, and pour yourself a perfect, refreshing homemade pint.

Shop by collection
987 products

  • Ball Lock Quick Disconnect (QD) Adjustable Pressure Relief Valve

    Adjustable Pressure Relief Valve with Quick Disconnect (QD)

    6 reviews

    We developed this product to relieve pressure when we transferred or filtered beer from one keg to another. This connects to the keg you are filtering into and has adjustable relief valve for letting pressure off as the keg fills up. Notes: The very end of the pressure relief valve can be adjusted by unscrewing to adjust the pressure. If tight, and not adjustable by hand, it needs to be loosened with pliers. Wrap a towel around the end piece of the pressure relief valve (about  the last 1/4 in) and loosen with pliers. Then finger tighten or loosen to desired pressure.

    $27.49

  • Filter Sheets - 20 cm x 20 cm (5-7 Micron) - PLACEHOLDER

    Seitz Filter Sheets | 20 cm x 20 cm | 5-7 Micron

    20cm x 20cm filter pads made for 20x20 plate filters. 5-7 micron pads are considered to be a "rough" filtration and are typically used to prepare the wine to be filtered by finer pads, usually either 2-3 micron or 1.5 micron depending on the winemaker's tastes and objectives. Please note that all pad filters are rated 'nominal', meaning that about 90-95% of all particulate matter at the micron rating will be filtered out. There will always be a little bit of smaller material that is also filtered out, as well as some larger material that will make it through. The filters can be sterilized by in-line steam, auto-claving, dry heat, hot water or chemical methods. We choose to run Saniclean (CL27) solution through the pads followed by sterile water or a small amount of wine that is then discarded. After the solution is run through the pads, and the pads have softened, the filter will need to be re-tightened. Each pad has an entry side and an exit side, distinguishable by their different textures. The entry side is a billowy type texture, frequently called the "rough" side; and the exit side has a crosshatch pattern and is commonly called the "smooth" side. For more information on how to load filter sheets into your plate and frame filter, see our Guide to Plate Filtering. Seitz K700 20cm x 20cm 5-7 Micron

    $61.99 - $178.99

  • Tubing - Reinforced Vinyl (1 in ID) - PLACEHOLDER

    Reinforced Vinyl Tubing | 1" ID

    1 review

    Use this reinforced vinyl tubing any place in your brewing system where you want an added layer of protection from tubing failure. This 1" ID Reinforced Vinyl Tubing is food-grade approved up to 158°F. It is often used in a in a brewing system where higher pressures will be used or for commercial applications. Because it is reinforced, it is less flexible than standard vinyl tubing. Tubing has a max working pressure of 125 PSI. Reinforced vinyl tubing. FDA & 3-A Sanitary certified for beverage and dairy processing. Inner Diameter (ID): 1" (25.4mm) Outer Diameter (OD): 1.35" (34.4mm) Working Pressure: 125 PSI Weight: 0.33 lbs/ft  

    $25.99 - $407.99

  • LaMotte Water Test Reagent - Hardness Reagent #7 LaMotte Water Test Reagent - Hardness Reagent #7

    Hardness Reagent #7 - Lamotte Water Test Reagent (4487WT-H)

    Replacement Hardness Reagent #7 (4487WT-H) for the Lamotte Water Test Kit (7189-01). 

    $12.30

  • Stainless - 1/2 in. mpt x 1/2 in. comp

    Stainless Compression Fitting - 1/2 in. x 1/2 in. MPT

    2 reviews

    When you want to customize your own setup, it’s good to have the right fitting on hand.   This stainless steel compression fitting gives you the versatility to put your setup together in the way that works best for you.   304-Type Stainless Steel compression fitting.   1/2" Comp. x 1/2" MPT

    $19.99

  • Vinyl Tubing - 5/8 in ID x 7/8 in OD Thick Wall - PLACEHOLDER

    Vinyl Transfer Tubing | Flexible | Racking | 5/8 in. ID | 7/8 in. OD

    FDA approved food grade tubing for transferring liquids. Made of Vinyl (PVC). Will not impart flavors or odors into your product. Thick wall tubing is recomended for pumping and pressurized systems. For siphoning and transferring liquids, see our thin wall and transfer tubing.  

    $7.89 - $115.49

  • Stainless 100mm Weldless Thermowell Stainless 100mm Weldless Thermowell

    Weldless Thermowell - 3.9 in.

    1 review

    Weldless thermowell made from 304-stainless steel. The probe measures 3.9" (100mm). The threaded portion is 1/2" BSP and measures 1.57" (40 mm) long. Includes a silicone o-ring, stainless steel slimline nut, and extra long female threaded nut for mounting a thermometer. Kegland Part number: KL01908

    $32.99

  • Fermentasaurus Replacement Lid Seal Fermentasaurus Replacement Lid Seal

    Fermentasaurus Replacement Lid Seal

    Fermentasaurus lid o-ring. Will fit either standard or pressure lid

    $6.59

  • Propane Regulator - Adjustable Pressure  ( High Pressure )   With Hose

    High Pressure Propane Regulator - Adjustable

    4 reviews

    Adjustable propane pressure regulator up to 10 psi. For our H205 & H250 burners. This propane regulator will attach a standard BBQ style propane tank to a brewing burner and has a 3/8-in flare swivel fitting. These item is not intended for indoor use.

    $37.99

  • Stainless Steel Mash Paddle - 30 in. Long Stainless Steel Mash Paddle - 30 in. Long

    Stainless Steel Mash Paddle - 30 in. Long (With Drilled Holes)

    1 review

    This heavy-duty mash paddle will rip through your mash tun like slicing through butter with a light saber! Drilled holes provide less resistance when breaking up dough balls. Tig welded and made from 304 stainless steel. The paddle is 76cm (29.9") in total length with a paddle head measurement of 23cm x 14cm (9" x 5.5"). KegLand Part Number: KL03797  

    $49.49

  • Digital Scale - 1000g Capacity x 1g Resolution Digital Scale - 1000g Capacity x 1g Resolution

    Digital Scale - 1000 g

    Every brewer needs a scale on hand, and with this affordable digital scale removes all excuses for not adding one to your brewhouse. Measure out small amounts of hops and specialty malts to dial in your recipe, or weigh DME, brew salts, and cleaning powders for greater accuracy over table spoon measurements. If you're looking for something with a larger capacity, please see our selection of grain scales. 1 kg (2.2 lb) capacity 1 g resolution Reads in g or oz Digital LED display Auto switch off saves battery life Batteries included Kegland Part Number: KL11020

    $13.49

  • Buon Vino Stopper #8-9 - With Hole - Each Buon Vino Stopper #8-9 - With Hole - Each

    Buon Vino Rubber Stopper - Size #8-9 (With Hole)

    Buon Vino stoppers have a longer taper to help produce a better fit and a snug seal, and a lip which prevents them from falling into your container. Available with a 3/8 inch hole for an airlock, or solid with no hole. #8-9 (medium) size is recommended for medium size barrels and 9 gallon demijohns.

    $2.79

  • MKII Temperature Controller MKII Temperature Controller

    MKII Temperature Controller - Wired

    4 reviews

    The most robust controller we offer and a perfect compliment to the technically savvy brewer.  This is the only controller we offer that allows for up to 12 steps. This can be incredibly handy for raising fermentation temperatures for diacetyl rests and also for cold crashing. You can also use it with electric mashtuns and pumps to do step mashes.  The high and low temp alarms are also handy, as is the ability to use with a distillation column.     Key features Dual input for Control of heating and cooling devices simultaneously Program up to 12 steps (unique to this controller) - which allows for advanced fermentation control and even  mashtun control if you used for mash. F or C Can be used with electric distilling column Adjustable differential  Adjustable differential between start of cooling and heating  High and low temperature alarms   Kegland Part number: KL01946

    $82.99

  • Brewmaster Brewing Kettle - 18.5 Gallon Brewmaster Brewing Kettle - 18.5 Gallon

    Brewmaster 18.5 Gallon Brew Kettle | Stainless Steel | Two Welded Couplers | Ball Valve Included | Silicone Handle Grips | Volume Markers

    4 reviews

    All the crucial features of a top-shelf brew kettle at an incredible price! Perfectly sized for 15 gallon batch brewers Made from stainless steel throughout which is easy-to-clean and offers a lifetime of reliable use Two welded 1/2" ports for common threaded brewing accessories—ball valve and barb fitting are included for the bottom port Internal volume markers make it easy to measure pre boil volume and post boil volume Silicone grips made for comfortable, slip-free handling If you’re searching for a fully featured brew kettle but don't want to break the bank, the Brewmaster 18.5 Gallon Stainless Brew Kettle will certainly do the trick. Made of 100 percent stainless steel and available for a truly amazing price, this reliable brew kettle is perfect for first-time brewers and experienced home brewers alike. Two ½-inch couplers are welded to the side of the kettle, and the bottom coupler can even be threaded on the inside of the kettle to use with a diverter or a kettle tube screen. These kettles are upgraded with Silicone Grip Handles and Stamped volume markers on the inside, making brew day that much easier. Includes a ball valve and a threaded adpator to 3/8" barb for easily attaching transfer tubing. Also included is a thread 1/2" plug for the thermometer port. Thermometer is not included and can be added at any time. Features: 18.5 Gallon Stainless Steel Brewmaster Brewing Kettle Two Welded 1/2" Full Couplers allow for internal and external attachments Stainless 1/2" Full Port Ball Valve & nipple included for bottom Coupler Stainless 1/2" Plug included for top coupler Stamped Volume Markers Silicone Handle Grips Internal Threading allows for conversion to Mash Tun or addition of whole hop filters Internal Dimensions: 18" Tall x 17.75" Ø Made from 201 Stainless Steel Approximate Internal Dimensions 18" tall 17.75" wide. 1.2 mm thick walls This item does not work with induction burners A ball valve, nipple, and plug are included for the welded couplers. A thermometer, or kettle screen can be added separately

    $219.99

  • Ss Brewtech Domed False Bottom - PLACEHOLDER Ss Brewtech Domed False Bottom - PLACEHOLDER

    Ss Brewtech Domed False Bottom

    3 reviews

    The best way to make your own mash tun out of one of your Ss Brew Kettles. These false bottoms are domed and have a central suction point. Features: Made from 304 stainless steel Domed shape Central suction point Welded handle Silicone gasket Note: These false bottoms are designed for the Ss Brewtech Brew Kettles and will not fit other kettles. They are also not compatible with the Ss Brewtech BME Kettles.   Lowest Price Guarantee, this item has MAP pricing so you can be confident you won't find it for less.

    $101.95 - $139.95

  • Anvil Cooling System for 7.5 gal Bucket Fermenter Anvil Cooling System for 7.5 gal Bucket Fermenter

    Anvil Cooling System for Bucket Fermenter - 7.5 gal.

    3 reviews

    Temperature control is a very important part of fermentation for optimal flavor control and quality of the finished beer. With the ANVIL cooling system, you won't be disappointed. This simple system includes virtually everything you need to keep your beer temperature closely regulated at an amazing price. Needed, but not included, is a cooler filled with water and ice, or a glycol chiller.   System Includes: Sanitary Stainless Steel Cooling Coil 12" Sanitary Stainless Steel Thermowell 4 Hole #7 Stopper Submersible Pump - 12V DC Max Head - 16 ft  (2) 5 ft Vinyl Cooling Hose Insulated Fermentor Jacket Anvil Temperature Controller  

    $163.99

  • Funnel - Vintage Shop - 25 cm (9.8) - White Plastic Funnel - Vintage Shop - 25 cm (9.8) - White Plastic

    Plastic Funnel | White | 25 cm | 10 in. | Vintage Shop

    Wide diameter funnel for large volume pouring. Inner groove can be used to install a funnel screen. Smooth inner surface for easy cleaning and sanitizing. Food grade plastic BPA free Max Temp Rating: 158°F (70°C) See below for full funnel specs.

    $10.99

  • BIAB Brew in a Bag Kettle Kit - PLACEHOLDER BIAB Brew in a Bag Kettle Kit - PLACEHOLDER

    Premium BIAB Brew In A Bag Kettle Kit

    5 reviews

    Our Premium BIAB (Brew In A Bag) kettle and bag kit is the most affordable way to get into all-grain brewing.  This hardware kit includes a stainless steel kettle, ball valve, hose barb connection, 1/2" plug and plumbers tape to seal the connections. While it does not include directions (you can easily Google BIAB), the basic concept is that you place the bag in the kettle, add the grain from your recipe along with a measured amount of hot water and let it steep for 60 minutes. You then remove the bag and boil with hops in the same vessel.  Very easy. Available with either an 8.5 or 14 gallon kettle. Brew in a bag kit includes: Stainless steel brew kettle with 1/2" FPT fittings 1/2" stainless steel ball valve, with stainless hex nipple and 1/2" stainless steel barb Stainless steel plug for thermometer port 29" X 29" nylon mesh bag with drawstring Roll of plumbers tape  

    $124.99 - $149.99

  • DigiBoil 65L - 3500watt - Digital 220-240V - Gen 2 DigiBoil 65L - 3500watt - Digital 220-240V - Gen 2

    DigiBoil Electric Kettle | Gen 2 | 65L | 17.1G | 220V

    15 reviews

    Digital temperature control Triple heating element control (2000w, 1000w and 500w) 17 gallon total capacity 304 stainless steel construction 220V / 20A power This is a versatile electric kettle that can be used as a standalone unit or integrated into your current brew system to serve a variety of functions. Easily brew 10-gallon extract batches. Use it to preheat your strike water or sparge water to a precise temperature. Pair it with a pump and heat exchanger to use it for HERMS brewing. Or slap on a still top lid and condenser for distilling! With so many ways to use the DigiBoil, and an affordable price tag to boot, it's hard not to get excited about this electric kettle! The Gen 2 DigiBoil features an upgraded glass lid, allowing you to monitor your heated or boiling liquid. Interested in using the DigiBoil for all-grain brewing? With the Mash Upgrade Kit, you can easily convert the DigiBoil into an electric mash tun! This DigiBoil model has three built-in heating elements that run off a 220V plug. The elements are 2000w, 1000w and 500w for a combined 3500 watts! The elements can be individually controlled, allowing you to use a single element to gently hold temperatures, or engage all three elements to quickly go from steeping temp to boiling. Temperatures are set and automatically maintained through the digital control panel. Simply set your desired temperature and flip on the heating element(s). Integrated stainless ball valve comes with a 13mm barb (approx. 1/2"). The barb can be removed to attach 1/2" FPT fittings if desired. More! Features: NEMA 6-30R plug (4.5 ft. cord) Heating elements are concealed for easy cleaning 304 stainless steel 1/2" ball valve with 13mm barb (approx. 1/2") Stamped-in volume markers (gallons & liters) Glass lid Temperature reads in °F or °C With elements turned off, hold both the +/- buttons to switch between °F or °C Compatible with reflux and pot still (DS130& DS120)* External Dimensions: 29" H x 19.5" W (including handles) Internal Dimensions: 20.25" H x 15.75" W ETL Listed *Distilling: to use the DigiBoil with a distilling condenser, you will need to purchase the still top lid (DS127). Warning: Distilling alcohol without permits or licensing is illegal in many countries, including the United States. It is the customer's responsibility to research their local, state, and federal laws and abide by those laws. MoreBeer! is not responsible for any damage or injury caused by either misuse or unlawful use. Stills can also be used to produce essential oils, vinegar, purified water and engine fuel (requires permit in USA). Kegland Part number: KL07313 NOTE: Due to the size of this item, it is not eligible for international shipping.

    $299.99

  • BrewBuilt Thermometer - 2.5" stem x 3" dial, 1/2" MPT BrewBuilt Thermometer - 2.5" stem x 3" dial, 1/2" MPT

    BrewBuilt® Thermometer | 3" Dial Face | 2.5" Probe

    BrewBuilt Bi-Metal Thermometers are top-of-the-line measuring instruments, made in the USA by Tel-Tru manufacturing.  Maintain the overall precision of your brew system with these incredibly accurate and generally superior thermometers.  These are produced according to strict standards, comparable to ISO9000 quality, and are set up with an 8 year manufacturers warranty boasting that quality. Bi-metal thermometers are the level of quality you want when a few degree difference results in a completely different malt profile on your beer.  While a bit more expensive, you won't ever mess up a batch because of incorrect temperature readings.  The 2.5" Stem is a perfect balance of being long enough to get accurate readings, while not protruding far enough to get hit by a wandering mash paddle or spoon. Are all bi-metal thermometers created equal? Not really. The problem with most bi-metal thermometers is that hang ups occur and you have to tap the thermometer to get an accurate reading. The cause of the problem is that the bimetallic helical coil in the stem of other bi-metal thermometers is tack welded to the stem itself. Our new line of thermometers feature a super sensitive bimetallic helical coil suspended from a copper coated bushing fixed in the stem. This superior design provides a faster response to temperature changes and assures more accurate readings. What does this mean? You don't have to tap the gauge with your finger as much. They are also accurate to 1% of the total range, feature a polished 3" 304 s/s housing, a hermetically sealed water proof case, glass face, external calibration capabilities, and a unique anti-parallax dial that provides for easy reading. The reading is actually taken from the last 2.5" of the probe. Features: Large 3" Dial Face for easy readings 2.5" Stem perfect for Boil Kettles and HLTs High Grade Stainless Steel Construction and hermetically sealed casing Can be calibrated with 1/16" Allen Wrench (Though should never be needed) Dual Scale Range: 0-220° F, -10 to 100° C Back Connection is 1/2" MPT, stem is 1/4" SS 8 year Manufacturer Warranty  

    $44.99

  • LaMotte Water Test Reagent - Total Alkalinity Indicator (15 ml)

    Total Alkalinity Indicator (15 mL) - LaMotte Water Test Reagent

    Replacement Total Alkalinity Indicator test reagent (15 ml) with a 6 month shelf life Does not include complete BrewLab test kit. See BrewLab Basic® test kit or BrewLab Plus test kit for additional information.

    $9.30

  • Colder Products - High Temp Plastic Male Quick Disconnect (QD) - 1/2 in Barb

    High Temp Plastic Male Quick Disconnect (QD) - 1/2" Barb

    1 review

    Colder Products® Quick Couplings CPC™ HFC35 Series Polysulfone NSF Listed Straight Hose Barb - Male Connector Without Shutoff Nominal Flow: 3/8" Pressure: Vacuum to 125 psi Temperature: -40° to 280°F Size: 1/2" B Not Compatible with the ALC, PLC or LC Series Large diameter hi gh flow, chemically resistant. Interchangeable with LinkTech brand 60PS Series  

    $24.99

  • Blichmann Floor Standing Burner - Natural Gas Conversion

    Blichmann Floor Standing Burner - Natural Gas Conversion

    4 reviews

    Looking to get away from using propane with your Blichmann Floor Standing Burner? With this conversion kit, you now have the ability to use natural gas! The kit includes the orifice and needle valve.

    $16.00

  • 7 gal | Brew Bucket Fermenter 2.0 7 gal | Brew Bucket Fermenter 2.0

    7 gal | Brew Bucket 2.0 | Ss Brewtech

    The Brew Bucket was the first product and the origin of Ss Brewtech, and for many brewers, the Brew Bucket was their first chance to ferment in stainless steel. Nearly a decade later, Ss challenged their engineering team to pair some of the newest technologies with the original design.   Brew Bucket Pure Flow Valve The star of the Brew Bucket 2.0 is the new Brew Bucket Pure Flow Valve. This valve uses Pure Flow technology, originally developed for the Ss line of professional brewhouses. The removable silicone membrane of the valve provides a sanitary environment where beer makes contact with nothing except silicone. Additionally, they have molded the racking arm geometry into the valve’s silicone diaphragm to provide a seamless flow path for beer when transferring from the Brew Bucket 2.0.   Sanitary Connection The valve attaches to the Brew Bucket using a welded external garden hose thread fitting that allows for a compact, easy-to-use connection without the need to fumble with additional clamps and gaskets. The threads are located externally and sealed by the gaskets built into the Pure Flow silicone, keeping them clean and sanitary. With the new valve design, the brewer can fully rotate the racking arm 360 degrees for maximum control while racking a finished beer.   Conical Base The Brew Bucket 2.0 continues what made the original a great solution for home brewers. The pro-inspired conical base helps minimize trub interaction with fermented beer, thus limiting any concerns of off flavors produced during maturation. Combined with the rotatable racking arm, brewers can effortlessly rack off clean beer like the pros do in craft breweries.   Full Width Lid The Brew Bucket 2.0 features the same full-width removable lid as the original, with a wide access opening that makes cleaning and sanitizing a breeze. Finally, the included thermowell has been repositioned to the lid, and the increased length allows for accurate readings, even when brewing partial batches.   Features Pro-Inspired Conical base Blow off port in lid for airlocks or blow off tubing Rotatable Silicone Racking Arm Pure Flow Valve for transfers and gravity samples 304 Stainless Steel 7 gallon capacity 300m Thermowell Thermometer | LCD Temp Display Module Dual Temp Wide lid with secure spring clamps Etched volume markings gals/liters Welded carry handles Surface safe Silicone Feet Specs: Tank Size: 7 gal Batch Size: 5 gal Dimensions: 24" H x 13" W x 13" D Weight: 11 lbs  

    $249.95

  • Brass Hose - Male x 1/2 in. mpt

    Brass Hose Fittings - Male Hose x 1/2 in. MPT

    Useful Part for adapting Garden Hose Thread to standard NPT. Male Garden Hose Thread with 1/2" MPT on the other side.

    $7.99

  • Brass - 1/2 in. mpt x 1/2 in. Barb

    Brass Barb - 1/2 in. x 1/2 in. MPT

    For insertion into ball valve for connecting 1/2'' ID hose.

    $8.99

  • BrewBuilt® X3 Jacketed Uni Conical Fermenter | Premium Chilling Package | IceMaster Max 2 BrewBuilt X3 Uni - Jacketed Conical - Premium Chilling Package - Max 2 - PLACEHOLDER

    BrewBuilt® X3 Jacketed Uni Conical Fermenter | Premium Chilling Package | IceMaster Max 2

    Due to high demand, some of these items are currently out of stock but available for pre-order. Please check status notes below when selecting a size option to see if it is In Stock or tagged as PreBook. We will automatically ship this to you when we receive more inventory. The X3 Jacketed Conical and IceMaster Max 2 work hand in glove from yeast pitching to cold crashing External cooling jacket with neoprene insulation allows for unparalleled temperature control for a homebrew fermenter Max 2 glycol chiller with digital controllers and built-in submersible pumps provides quiet and efficient chilling Insulated tubing sets eliminate line sweating and feature dry break quick disconnects at the cooling jacket connection points The BrewBuilt Ultimate Chilling package includes everything you'll need to maintain a precise level of temperature control throughout the fermentation process. The X3 Jacketed Conical is second-to-none in homebrew-level cooling capabilities—mirroring the fermenter design that professional brewers have long relied on to keep their temperatures in check. And what better unit to provide the cooling solution than the IceMaster Max 2? This low-profile glycol chiller provides all the cooling capacity you'll need and is so compact that it only takes up about 12" of extra space next to your conical. X3 Jacketed Uni Conical & IceMaster Max 2 The X3 Jacketed Uni Conical offers cutting edge design features that have long been reserved for pro-level fermentation tanks. Circulating cooling solution through an external cooling jacket offers superior cooling power when compared to internal cooling coils, and eliminates the need for cleaning a wonky apparatus after you've transferred out your finished beer. This pressurizable fermenter also sports a neoprene jacket for added insulation, Flex Chamber collection container for yeast harvesting or trub dumps, internal floating racking tube for clear beer transfers, and so much more! The IceMaster Max 2 makes for the perfect tag team partner, providing all the cooling capacity you'll need for small-volume batches. And with two built-in submersible pumps with independent controllers, you can always add a sidekick fermenter and control both batches simultaneously. BrewBuilt Insulated Glycol Tubing Kit In addition to the conical and chiller, the kit also includes an insulated tubing set that improves chilling efficiency and eliminates line sweating. The kit consists of: 1 - Insulated Tubing Set (2 x 6' lines) 2 - High Temp Plastic Female QDs w/ 3/8" Barb* 2 - High Temp Plastic Male QDs w/ 1/2" MPT* 2 - 1.5" Tri-Clamps 2 - 1.5" T.C. Gaskets 2 - 1.5" T.C. x 1/2" FPT Adapters *These premium quick disconnects feature shutoff valves that provide a "dry break" when they're disconnected. That means no cooling solution leaking all over your brewery every time you take the system apart for cleaning. The Female QDs are installed on the insulated tubing, and the Male QDs are installed on the T.C. x FPT Adapters that connect to the cooling jacket's inlet and outlet.

    $2,149.99 - $2,999.99

  • Low stock! Chugger Pump - High Temperature Stainless Steel - X-Dry - Center Inlet Threaded Chugger Pump - High Temperature Stainless Steel - X-Dry - Center Inlet Threaded

    X-Dry Series Chugger Pump (Center Inlet) - Stainless Steel 1/2 in threads

    Introducing the X-Dry Series Chugger Pumps! These pumps offer the same great quality we've come to expect from Chugger, but now feature Run-Dry Protection. Although the Chugger still needs to be primed before each use, the X-Dry Series offers a new level of protection from damage due to cavitation. The Chugger lineup of pumps represents a great value for an even better price. These pumps are workhorses in the brewery. Featuring a robust flow rate of 7 gpm, and a magnetic drive designed to handle back-pressure, these pumps are a great addition to any brewing setup! The Stainless Steel Chugger showcases their molded Stainless Steel Pump Head. This stainless pump is a steal for the price, and we've been more than happy with the quality! Use this to ease transfers between kettles, cool wort via a counterflow chiller, or recirculate icewater for quicker chilling! The Chugger pump has 3/4" MPT inlet and 1/2" MPT outlet, allowing easy configuration for any application! We recommend setting these pumps up with a Ball valve on the outflow side, this way you can throttle down the outgoing flow rate, allowing for more efficient sparges or cooling! The pump head can also be rotated 360° (in 90° intervals) allowing for even more customization! Features: Run Dry Carbon Bearing Stainless Steel Center Inlet Pump Head Food Grade up to 250° F 3/4" MPT inlet and 1/2" MPT outlet High Flow rate of 7 gpm Max Head 18.6 ft 115v 55" cord and plug attached 50/60 Hz, 1.4 amp 1/20 HP, 3500 RPM No more issues with crossthreading plastic heads or snapping off fittings Note: When using silicone tubing, we recommend using a slighlty larger barb than the I.D. of the tubing. This is because silicone tubing tends to have greater pliability than most tubing. For example, when using 1/2" silicone tubing, we recommend our 5/8" barb (H620), to help ensure a better seal!  

    $309.99

  • SS False Bottom (30cm/11.8in Diameter) with 13mm/.5in Barb SS False Bottom (30cm/11.8in Diameter) with 13mm/.5in Barb

    Stainless Steel False Bottom Kit - 11.8 in.

    1 review

    This domed false bottom works great with most 10 gallon insulated cooler mash tuns or kettles with a similar diameter. The dome shape design adds strength so it can handle a heavy load of grain. Comes with 13 mm (.51") barb which is perfect for 1/2" ID silicone tubing. Made from 304 stainless steel. 30 cm (11.8") diameter. KegLand Part Number: KL01250  

    $43.99

  • Filter Sheets - 20 cm x 20 cm (0.45 Micron) - PLACEHOLDER

    Seitz Filter Sheets | 20 cm x 20 cm | 0.45 Micron

    3 reviews

    20cm x 20cm filter pads made for 20x20 plate filters. Pads rated 0.45 micron remove 99.999% of bacteria. This pad is the right choice when you want to promote sterility in the bottle, although do please note that the pad does not remove 100% of bacteria - only a cartridge filter can do so. The filters can be sterilized by in-line steam, auto-claving, dry heat, hot water or chemical methods. We choose to run Saniclean (CL27) solution through the pads followed by sterile water or a small amount of wine that is then discarded. After the solution is run through the pads, and the pads have softened, the filter will need to be re-tightened. Each pad has an entry side and an exit side, distinguishable by their different textures. The entry side is a billowy type texture, frequently called the "rough" side; and the exit side has a crosshatch pattern and is commonly called the "smooth" side. For more information on how to load filter sheets into your plate and frame filter, see our Guide to Plate Filtering. Seitz EK 20cm x 20cm 0.45 Micron

    $80.99 - $273.99

  • Glass Wine Thief - Economy

    Glass Wine Thief - Economy

    9 reviews

    A unique, functional variation of the traditional glass wine thief. We ordered these from eastern europe where the pricing/quality is great. The design was supposed to look exactly like our traditional thiefs we have made locally in Berkeley, California. Thus we used a picture of the original thief in our latest catalog. But alas, when they arrived they looked unlike any wine thief we have seen. But.... they work fantastic so we are happy and we think you will be too! Upon further testing and working with this thief, it has become clear that it can be tempermental about which carboys it fits in. If you'd like a glass thief for a carboy, we have to recommend the MT345. This still works great for barrels, even stacked ones! 1" in diameter, 10" from the bend to the tip and about 14" total length.

    $34.99

  • Stainless - 1/4 in 3 Way Ball Valve - FPT x MPT x FPT

    Stainless - 1/4 in 3 Way Ball Valve - FPT x MPT x FPT

    2 reviews

    Stainless - 1/4 in 3 Way Ball Valve - FPT x MPT x FPT   Please Note: Valves include a Teflon gasket. Do not soak the valves in PBW which can corrode Teflon material after prolonged contact.

    $28.99

  • Distillation Lid w/ Gasket for 35L BrewZilla / DigiBoil (47mm Hole) - 6 mm Gasket Distillation Lid w/ Gasket for 35L BrewZilla / DigiBoil (47mm Hole) - 6 mm Gasket

    Distillation Lid for 35L BrewZilla / DigiBoil | 6mm Gasket

    14 reviews

    Use this lid along with the 35L BrewZilla or DigiBoil and a copper still top (DS120or DS130) to make your own easy-to-use distillery. This lid has a 1.85" (47mm) hole for the still top. Lid gasket included. Note: This lid uses a 6mm gasket to better fit the Gen 4 BrewZilla and Gen 2 DigiBoil. It is also backwards compatible with Gen 3 and older BrewZillas and Gen 1 DigiBoils. To improve the seal further, we highly recommend using the Adjustable Lid Clamps with the Distillation Lid if your unit does not have them. Made from 304 stainless steel Measures 12.25" in diameter. Kegland Part number: KL03483

    $38.49

  • Pump - MKII High Temp Magnetic Drive (25 Watts) - T.C. Pump Head w/ Inline T.C. Ports Pump - MKII High Temp Magnetic Drive (25 Watts) - T.C. Pump Head w/ Inline T.C. Ports

    KegLand MKII Magnetic Drive Pump | Tri-Clamp Inline Pump Head | Stainless Steel | 5 GPM | 25 Watt

    Magnetic drive enables you to slow down the flow without damaging the pump—just add a ball valve to the outlet! T.C. connection allows the pump head to be oriented at any angle in a full 360-degrees Pull ring PRV at the pump outlet makes it easy to purge air and prime the pump before each use Inline flow path for smooth integration into your brewery while keeping your tubing lines tidy Stainless steel head with 1.5" T.C. ports to attach your preferred tri-clamp fittings The best-selling MKII Magnetic Drive Pump now available with a major upgrade! This unit comes standard with an inline stainless steel pump head that installs on the pump body with a 3" tri-clamp. Compared to the standard "center inlet" pump head, the "inline" flow path can make it much easier to integrate into your brewery and keep your brewing hoses tidy. At the outlet of the pump, there is a very handy pull ring PRV that allows you to bleed liquor or wort from the pump head to release trapped air and prime the pump. And with the 3" T.C. connection, not only do you have a full 360-degrees to orient the pump head any which way, cleaning the pump after use could not be easier—just pop off the tri-clamp, wash out the pump head, and clamp back on. The MKII is a perfect pump for your system and comes highly recommended for brewers stepping up to all-grain brewing. Rather than schlepping heavy kettles filled with hot liquor or wort around your brewery, or awkwardly stacking them into a 3-tier gravity setup, allow this handy pump to move liquid from vessel to vessel while everything remains in place. The magnetic drive allows you to slow down the flow without damaging the pump. This can be done by attaching a ball valve to the outlet side of the pump, and then you simply open or close the valve to control the flow rate. The pump itself is not self-priming, but priming is super easy thanks to the pull ring PRV which will help ensure the pump head is full of liquid and trapped air is released before powering it on. Tri-Clamp Pump Head The T.C. pump head can be removed quickly and easily using the 3" tri-clamp. This means no drivers or power drills are needed to back out the six Phillips head screws that mount the pump head on the standard version of the MKII. Whip the head off in a flash to clear out spent grain, hop material, or clear a blockage. Attaching the pump head with a tri-clamp also allows the head to be rotated at any angle in a full 360-degrees. This makes it easy to configure the plumbing to your unique brewery setup. Inline Design An "inline" pump head simply means the input and output are on a straight horizontal line with one another which can make it easier to integrate into your brewery setup. If you're using a 3-vessel horizontal system, the inline pump head will make it easier to keep your hoses neat and tidy compared to pumps heads with a center inlet. PRV Purge Valve The corny keg style PRV will make priming the pump a breeze. Simply let bleed the pump head to purge air out before turning the pump on and you'll avoid any cavitation issues. The PRV also acts as a safety so you do not over pressurize your pump head or brewery system. 304 Stainless Steel The entire pump head is made from 304 grade stainless steel so it's highly resistant to chemicals, heat, and physical abuse. The 1/2" BSP threaded ports can be used to attach barbs, quick disconnects, camlocks, tri-clamp adapters, or any other 1/2" fittings you prefer. Features: 110V / 60hz Max Head: 11.15 ft. (3.4 m) Max Flow: 5 Gal/min (19L/min) Max Temperature: 248°F (120°C) 360° rotatable stainless steel pump head 1.5" T.C. ports Water resistant casing (not waterproof) KegLand Part Number: KL27526 If you're brewing on a budget and want the most affordable pump possible, check out the standard model MKII pump. This has been our best-selling pump for years and you can always upgrade it down the road with the standard stainless center inlet head or inline stainless tri-clamp head.

    $186.99

  • KegLand - Big Jugs - Plastic Pitcher - 3.5L - 3500 mL / 125 oz Graduation Scale KegLand - Big Jugs - Plastic Pitcher - 3.5L - 3500 mL / 125 oz Graduation Scale

    KegLand Big Jugs | Graduated Measuring Pitcher | BPA Free | 3.5L / 125 oz

    Crafted from heavy-duty, impact-resistant material, Big Jugs endure drops and freezer conditions without cracking or breaking Made from BPA-free materials with clear, dual-scale markings for accurate measurements up to 125 fl oz or 3500 mL Features a wide-mouth opening for easy filling and cleaning, an integrated drip-free spout, and a comfortable ergonomic handle for versatile use Tired of flimsy measuring tools that crack and break? Big Jugs are your robust solution. Perfect for dissolving ingredients like DME or dextrose for bottle conditioning, or for safely mixing cleaning chemicals, these jugs are heavy-duty and impact-resistant, designed to endure drops and even freezer conditions without breaking. Big Jugs are made from BPA-free materials, ensuring no harmful chemicals leach into your food or boiling liquids. Achieve precise results with the clear, easy-to-read measurement markings with dual scales that measure up to 125 fl oz or 3500 mL. The smart design of Big Jugs prioritizes your convenience. A wide-mouth opening allows for effortless filling and cleaning, while the integrated spout guarantees smooth, drip-free pouring. With a generous capacity and a comfortable, ergonomic handle, these jugs are as versatile as they are durable, ready for any task in your beverage crafting process. Key Advantages: Extreme Durability: Withstands impact and harsh conditions. Food-Safe: Made with BPA-free materials. Accurate & Easy: Clear markings for precise measurements. Convenient Features: Wide opening, drip-free spout, ergonomic handle. Multi-Use Functionality: Ideal for a broad range of applications. KegLand Part Number: KL45124  

    $9.99

  • O-Ring for High Temp Plastic Quick Disconnect (QD) Fittings

    O-Ring for High Temp Plastic Quick Disconnect (QD)

    1 review

    Made from EPDM material, these gaskets are to replace the stock ones that come with the CPC or LinkTech High Temp Plastic 3/8" Flow Path quick disconnect fittings (our H501 Series)

    $0.79

  • Kegmenter - 4 in. T.C. Pressure Lid - 2 in. T.C. Port Kegmenter - 4 in. T.C. Pressure Lid - 2 in. T.C. Port

    Tri-Clamp Pressure Lid for Kegmenter Fermentation Keg | 4" x 2" T.C.

    Oxygen-Free Dry Hopping: Designed to allow dry hopping without exposing the batch to oxygen when used in combination with the 2" Hop Bong, 2" Butterfly Valve and additional accessories. Customizable with Accessories: Features undrilled ports for optional accessories such as the Temp Twister Cooling Coil and Thermowell, enhancing functionality and convenience. Improved WiFi Reading: The plastic lid improves KegLand RAPT Pill WiFi reading, ensuring better connectivity. Durable and Pressure-Resistant: Includes 4" and 2" Tri-Clamp ferrules, suitable for use up to 21 psi, with recommended PRV options for safe operation at specified pressures. Compatible with all Kegmenter Fermentation Kegs with 4" Tri-Clamp ferrule. See the Kegmenter Hop Bong Pressure Pack for a complete kit option. Upgrade your Kegmenter Fermentation Keg with this 4" Tri-Clamp Lid from KegLand. Add yeast, hops or even take samples from a wine thief from the top and not have to remove the entire lid. This particular lid was designed to address the growing desire to dry hop without exposing the batch to oxygen from opening the lid. By using this lid in conjunction with the FermZilla 2" Butterfly Valve and Hop Bong Kit, you will be able to purge CO2 into the tube and expel all the oxygen inside it and dump freely into the vessel. The lid features closed ports that can be drilled out to install optional accessories like the Temp Twister Cooling Coil and a Thermowell. The plastic lid also allows for improved KegLand RAPT Pill WiFi reading compared to the Kegmenter fully encasing the Pill in stainless steel. Due to the large 4" Tri-Clamp diameter, it is difficult to get higher pressures without leaking, therefore we suggest using the lid up to 21 psi. If you do not already own any of the Hop Bong fittings listed below, the Kegmenter Hop Bong Pressure Pack is also available as a complete kit. Features: (2) PCO1881 Male Ports Recommended for use with Red (Gas In) & Yellow (Bev Out) Ball Lock Caps PRV Port This should only be used with a Red 35 psi PRV or the Yellow 17 psi PRV. 2" T.C. Ferrule 4" T.C. Ferrule Undrilled Ports (for optional accessories): Thermowell Port (see below for FermZilla Thermowell kit) (2) Temp Twister Ports Please Note: Temp Twister will need to be bent on a 20° Angle in order to fit on the curved lid and align vertically in the tank. Hop Bong To use the Pressure Lid with the 2" Hop Bong, we recommend the following fittings if you do not have them already: 2 x Red Ball Lock Cap (FE13) 1 x Yellow Ball Lock Cap (FE146) 1 x 4" Tri-Clamp, 3 Segment Clamp (H734) 1 x 4" Tri-Clamp Seal (FF401) 3 x 2" Tri-Clamp (FF20) 3 x 2" Tri-Clamp Seal (FF201) 1 x 2" Butterfly Valve (FE198) 1 x 2" Hop Bong (FE202) 1 x 2" Hop Bong Cap (FE204) 1 x PCO1881 PRV Cap (KG523) 1 x Red 35 psi PRV (FE101C) Please note: The last product photo is an example image of what the lid looks like fully fitted out with the Hop Bong and other accessories that are not included with the lid.

    $16.49

  • DigiBoil Complete Still Kit (35L) - Copper Pot Still Condenser - PLACEHOLDER DigiBoil Complete Still Kit (35L) - Copper Pot Still Condenser - PLACEHOLDER

    35L DigiBoil Still Kit with Copper Pot Still Condenser

    1 review

    Due to high demand, some of these items are currently out of stock but available for pre-order. Please check status notes below when selecting a size option to see if it is In Stock or tagged as PreBook. We will automatically ship this to you when we receive more inventory.   Ready to dive into distilling, but unsure how to piece together your home still? Check out these complete systems that will set you on the path to producing high quality spirits. This kit comes with the 35L DigiBoil Electric Kettle and the Copper Pot Still Condenser. The Copper Pot Still is perfect when you want the flavor of the wash to come through, whereas a reflux still is more favorable for producing pure, unflavored spirits. If you want to make whiskeys and gins, this pot still top is a great way to start! The classic "V" shape captures the vital esters, aldehydes, and phenolic compounds that are necessary for the complex spirits such as whiskeys and gins. Made from solid copper. When your hot spirit comes into contact with the copper, the copper acts like a catalytic converter to drive sulfur out of the spirit. This leads to less off-flavors and higher quality spirit. Kit Includes: 35L DigiBoil Gen 2 (110V or 220V) 110V / 15A power and plug (5 ft. cord) 220V / 15A power NEMA 6-15 plug (5 ft. cord) Copper Reflux Still Condenser w/ Barb Connections 13 mm Inlet/Outlet Barbs (0.51 in.) Distillation Lid & Gasket Set of Adjustable Lid Clamps   Warning: Distilling alcohol without permits or licensing is illegal in many countries, including the United States. It is the customer's responsibility to research their local, state, and federal laws and abide by those laws. Brewmaster is not responsible for any damage or injury caused by either misuse or unlawful use. Stills can also be used to produce essential oils, vinegar, purified water and engine fuel (requires permit in USA).

    $389.99

  • Pipette - 1mL Pipette - 1mL

    Disposable Pipette | 1 mL

    4 reviews

    Used to measure small amounts of fluid. Used in winemaking to measure the correct amount of wine for a residual sugar test using a clinitest tablet. These pipettes have a uniform pulled tip and are calibrated to deliver to the tip, with two rings near the top denoting that the small amount remaining in the tip after free delivery has ceased must be blown out and added to the main volume delivered. Capacity: 1 mL Tolerance: ±0.02 mL Subdivisions: 0.01 mL Negative Graduations: 0.2 mL   Regarding "Disposable" Pipettes Please Note: While these pipettes are designated as 'disposable' to prioritize efficiency and sterility in professional laboratory settings, their high-quality borosilicate glass construction is durable enough to withstand standard cleaning and sterilization processes. For home applications or general tasks where strict medical-grade sterility is not paramount, this allows the option of reuse rather than immediate disposal. Please be aware that reusing these pipettes is done at the user's discretion, particularly regarding the maintenance of calibration accuracy and effective decontamination.

    $5.49

  • Stainless - 1/2 x 3/4 BSP Reducing Bush

    Stainless Bushing - 1/2 in. x 3/4 in. BSP

    1/2" female x 3/4" male BSP reducing bush. Made from 304 stainless steel. Kegland Part Number: KL06583

    $4.99

  • Filter Sheets - 20 cm x 20 cm (2-3 Micron) - PLACEHOLDER

    Seitz Filter Sheets | 20 cm x 20 cm | 2-3 Micron

    3 reviews

    Due to high demand, some of these items are currently out of stock but available for pre-order. Please check status notes below when selecting a size option to see if it is In Stock or tagged as PreBook. We will automatically ship this to you when we receive more inventory. 20cm x 20cm filter pads made for 20x20 plate filters. 2-3 micron pads are for general polishing of wines that do not need to be sterile filtered. Please note that all pad filters are rated 'nominal', meaning that about 90-95% of all particulate matter at the micron rating will be filtered out. There will always be a little bit of smaller material that is also filtered out, as well as some larger material that will make it through. The filters can be sterilized by in-line steam, auto-claving, dry heat, hot water or chemical methods. We choose to run Saniclean (CL27) solution through the pads followed by sterile water or a small amount of wine that is then discarded. After the solution is run through the pads, and the pads have softened, the filter will need to be re-tightened. Each pad has an entry side and an exit side, distinguishable by their different textures. The entry side is a billowy type texture, frequently called the "rough" side; and the exit side has a crosshatch pattern and is commonly called the "smooth" side. For more information on how to load filter sheets into your plate and frame filter, see our Guide to Plate Filtering. Seitz K250 20cm x 20cm 2-3 Micron  

    $68.99 - $231.99

  • Blichmann ThruMometer 3/8 in. In-line Thermometer

    Blichmann ThruMometer 3/8 in. In-line Thermometer

    10 reviews

    The Blichmann ThruMometer In-line Thermometer is a great way to know the temperature of your wort while it's being transferred. Very helpful when using a counterflow or plate chiller to read the temperature of your wort going into the fermenter. Made of heat-treated highly corrosion resistant aluminum. Reads from 58°F - 88°F, and has 3/8" in and out posts. Note- Clean with mild detergent only, using warm (no hotter than 140°F) water. Do not soak in the same bucket as other metals, as this could result in galvanic corrosion to the aluminum. After use, dry thoroughly and store in the protective plastic tube.

    $34.99

  • Stainless - 3/8 in. BSPP Male x 10 mm Hose Barb Stainless - 3/8 in. BSPP Male x 10 mm Hose Barb

    Stainless Barb - 3/8 in. Male BSPP x 3/8 in.

    1 review

    This Stainless Steel BSPP barb will connect any tubing with a 3/8" ID line to any fitting with a 3/8" Female BSPP connection. The barb is slightly oversized at 10 mm (0.39") compared to 3/8" (0.37") which will give you a tighter connection with your tubing. BSP vs. BSPP BSP (or BSPT) fittings have a tapered thread and require teflon tape to form a seal between the male and female fitting. BSP fittings are generally intended to be used with their counterpart of the same thread type. ONLY 1/2" BSP fittings are compatible with US-standard NPT fittings of the same size. BSPP fittings, on the other hand, have a straight thread, require a gasket seated inside the female fitting to form a seal, and are not compatible with NPT. KegLand Part Number: KL06644  

    $3.29

  • Kegmenter - 50 L (4 in T.C. Lid w/ Ball Lock Posts, Floating Dip Tube) Kegmenter - 50 L (4 in T.C. Lid w/ Ball Lock Posts, Floating Dip Tube)

    Kegmenter Fermentation Keg - 13.2 gal.

    2 reviews

    Want an easy-to-use, stainless vessel that ferments and carbonates? This 50L/13.2 Gallon keg has been modified to allow you to do both! The top is fitted with a large 4 inch tri-clamp lid with two ball lock posts and a pressure relief valve. You can use this vessel to ferment, carbonate, serve, or push the beer through a filter. The posts are recessed which allows you to stack these kegs up to 4 high. A 4" T.C. end cap with pre drilled hole is also available (H691), which can be paired with a #3 stopper and airlock. Also consider the Kegmenter Hop Bong Pressure Pack which allows for oxygen-free dry hopping and also features ball lock posts for Gas & Liquid. Depending on how long it will take to consume the finished beer, we recommend using two kegmenters, one for fermentation and one for carbonating and serving. After fermentation, there will be a large trub cake at the bottom of the vessel. Leaving finished beer on the trub for too long (2-3 weeks) may eventually lead to off-flavors. Check out our ball lock jumper line (KEG575) to easily transfer from one kegmenter to the other. Also consider our beer filter kit (FIL40), which will allow you to filter the beer during transfer. Features: Rated up to 2.5 BAR (36 psi) 4" T.C. lid with ball lock posts Floating dip tube Stainless steel 1.8 mm thick Use: As a stainless steel fermenter that is easy to clean Great choice for 10 gallon fermentations Easy to pressurize the kegmenter after fermentation to push through a filter and into another keg Fermenting under pressure, allowing CO2 to exit via the relief valve, reduces esters and fusel alcohol production allowing you to ferment at warmer temperatures Distillation - with the addition of a T.C. reducer and condenser (H701 / DS120 / DS130) As a cellar keg for topping up barrels Warning: Always depressurize keg before removing lid. Does not come with spunding valve show in example photo. See FIL42A. Kegland Part number: KL04565

    $329.99

  • Double Laser Infrared Thermometer Gun Double Laser Infrared Thermometer Gun

    Double Laser Infrared Thermometer Gun

    1 review

    Take temperature readings instantly and from a safe distance with this infrared thermometer gun. Use it to check how close you are to the hot break before your boil, or measure the temp of your empty mash tun and grains to help predict temperature loss when you add strike water and mash in. Dual lasers is an important feature when choosing infrared thermometers because it allows for much higher accuracy. When measuring an object, a dual laser thermometer gun will help you greatly in finding the convergence point of the measured target and spot ratio. This can only be achieved with a dual laser unit. Features: Double Laser pointer for higher accuracy Simple one-handed operation Laser ON/OFF switch Low battery indication LED backlight Reads in °F / °C Automatic shutdown after 15 seconds Display hold, Scan function FCC, CE, ROHS Certified Notes: 1. When using this product to measure temperature, consider the ratio between the distance (the length from the product to the measured object) and the size of the measurement area, referred to as the object distance ratio. When the distance between the product and the measured object increases, the measurement area will increase accordingly. 2. If you want to use boiled water to measure the unit's accuracy, do not allow smoke or water vapor to contact the temperature sensing area, and keep the measurement angle at 45 ~ 60 degrees.   KegLand Item Number: KL21883  

    $38.49

  • Anvil Mash Paddle Anvil Mash Paddle

    Anvil Mash Paddle Stainless Steel - 24 in. (With Holes)

    1 review

    Heavy duty 16 gauge stainless steel commercial grade spoon is 21" long and will last an eternity. Twice the thickness of most imported spoons. The convenient hang hook lets you rest it on the kettle or just about anywhere.  

    $31.99

  • Universal Stopper #11-11.5 - With Hole - Each (Large) Universal Stopper #11-11.5 - With Hole - Each (Large)

    Universal Rubber Stopper - Size #11-11.5 (With Hole)

    Universal stoppers have a longer taper to help produce a better fit and a snug seal, and a lip which prevents them from falling into your container. Available with a 3/8 inch hole for an airlock, or solid with no hole. #11-11.5 (large) size is recommended for full size barrels and 14 gallon demijohns.

    $4.99

  • Blichmann Chiller Coil - 14 - 42 gal Fermenator Blichmann Chiller Coil - 14 - 42 gal Fermenator

    Blichmann Cooling Coil for 14 to 42 gal Fermenator

    8 reviews

    Use this coil to make a cooling system for your 14 to 42 gallon Fermenator. Made from 304 stainless steel with 1/2" NPT bulkhead fittings that are easy to install. Partner the Blichmann Cooling Coil with a temperature controller, recirculation pump and glycol chiller for a complete cooling system. Features: 25 ft long tube made from 304 stainless steel Tall Cooling Coil fits 14 to 42 gallon Fermenator Easy to install and sanitize bulkhead fittings 1/2" NPT connections Includes two 3/8" 90° QuickConnector fittings 13.5" tall x 9" diameter

    $119.99


You have seen 432 out of 987 products

Frequently Asked Questions

Beer Brewing Equipment Collection Article +

Home Brewing Beer Making beer at home is easy, rewarding and can lead to some amazing friendships & interactions. Like most people I started brewing at home with beer brewing kit from MoreBeer! The kit came with everything I needed to brew a batch of beer at home. Typical of most homebrewing starter kits, the equipment and beer recipe ingredients where for extract brewing. I know a lot of people that just dived right into all-grain brewing and there is nothing wrong with that approach. For myself and what I recommend to others as well is starting with extract brewing. It allows you to focus on a few steps in the brewing process as you are essentially starting from the boil. I think the old saying crawl, walk, run applies beautifully to learning to brew and most anything in life. By starting with extract you can focus on, in my opinion the two most important things in brewing; cleaning / sanitation and fermentation. Not to say can’t jump into all grain brewing and give these topics the respect they deserve. It’s just a lot easier to focus on and learn a few things at a time. After all you don’t eat an entire pizza at once, you have one slice at a time. Once you have brewed a few batches of extract beer a good natural progression is to try what they call a mini-mash. This essentially allows you get some of your sugars from mashing grains but still back it up with liquid or dried malt extract. Aside from allowing you to learn the brewing process in steps, it also allows you to upgrade your brewing system over time. Purchasing a complete all grain system can be expensive and if you’re just starting a new hobby it’s nice to spend as you go. However with systems like the RoboBrew/BrewZilla, getting started with all-grain brewing has never been more affordable and accessible.  When I started brewing these type of systems were not available though. Either way, most extract brewers move to all-grain brewing; as it allows you to take complete control over your beer recipe and intern the finished beer your making. Another topic worth mentioning is the social aspect of beer & brewing. We all know beer is a social drink, heck this country “The United States” was founded in pubs by revolutionary individuals. Sure it’s fun to sit back and enjoy a pint of a beer you made. But it’s even funnier to share a pint with friends and family. That leads to another great way to learn and improve your brewing, joining a homebrew club! For the first few years of my brewing career I brewed alone and only shared by creations with family and friends. It wasn’t until I was selling some homebrew equipment on the internet that I was directed towards joining a homebrew club. The person purchasing equipment from me asked if I was aware of the local homebrew club. It really never crossed my mind to seek out or join a club, but let me tell you; it was one of the best recommendations and things I could have ever done. Not only do you meet and network with likeminded brewers like yourself; the friendships that have come from the club have not only enriched my life it has my family as well. I know being social may not be for everyone, but meeting and speaking with other brewers is a great way to get More! out of an already amazing hobby! Regardless of your brewing path, be it extract or all grain or alone or with others; always remember to keep learning and have fun brewing, cheers!

BEER Collection Article +

What is Beer? Beer is a delicious alcoholic drink that is made by yeast, fermenting a malt sugar & water mixture that is typically flavored with hops. It has been brewed since the dawn of civilization, in fact, it’s even been credited for saving the world by some scientists and historians. The earliest evidence of beer production dates back to about 3500 BC. However, there is speculation that it was being produced as far back as 10,000 BC when humans first started farming malts. The ancient Sumerian text "The Hymn to Ninkasi" is a prayer but could also be considered the earliest written beer recipe. For thousands of years fermented malt beverages were being consumed by numerous civilizations, but none of them really resembled what we know as Beer today.  It wasn’t until 1516 AD in Bavaria when the Reinheitsgebot (Beer purity law) was adopted that it started to look, smell and taste like the alcoholic drink we all know and love today. The Reinheitsgebot is actually credited as the oldest food-quality regulation in history and is still in use to this day. It states that the only allowed ingredients in Beer are water, hops and malted barley.  Today, Beer is the third most popular drink in the world with only water and tea in front of it. Cheers to a long history, a bright future and another round of our favorite drink, BEER! Types of Beer One of the reasons it's is so popular is that there is literally something for everyone. Beer styles can range from sweet to bitter or even sour and everything in between. Beer is commonly categorized into two varieties: Ales and Lagers . An Ale is produced with a top fermenting yeast called Saccharomyces cerevisiae. This strain of yeast typically clumps together and rises towards the top of the fermenter. The recommended fermentation temperature range for ale yeast is between 15–25°C (59–77°F). Ale yeast is known for its higher ester production that is commonly described as “Fruity” and comes across as apple, pear, pineapple, etc. A Lager is cool fermented and produced with a bottom fermenting yeast called Saccharomyces pastorianus. This strain is typically fermented around 7–12°C (45–54°F) and then aged at even cooler temps for several weeks or up to several months. The original German word lager means “storehouse” representing this cold storage step, but now the term is synonymous with a beer style and not the literal interpretation. Less popular than the two previous styles, but none less delicious, is the Lambic styles of Belgium , also called “Wild” or “Mixed Fermentation” in regions outside of Belgium. These styles are fermented with a Saccharomyces strain of yeast as well as Bretttanomyces and Lactobacillus bacteria. This use of bacteria gives them a sour or “funky” taste. These three high level classifications are only the tip of the iceberg when it comes to beer styles. In fact, there is an organization called the BJCP ( Beer Judge Certification Program ) that was founded in 1985 to encourage the knowledge and understanding of the world’s diverse styles. As of their last published style guidelines, there are 34 top level styles with over 100 substyles categorized. And with how popular craft beer has become lately, this list of recognized styles will only continue to grow. Making your own Beer If you found this page and read your way down to this section you obviously love and enjoy beer. In our experience one of the most enjoyable beer is the one you made yourself. Not only is it very rewarding and enjoyable it’s super easy to get started making your own beer at home . You can start with just a few pieces of brewing starter equipment and make amazing beer. Just as types can be boiled down (pun intended) to two high level classifications, so can brewing beer. These types are called Extract Brewing and All Grain Brewing . Extract brewing is what most home brewers start with due to it requiring less equipment and fewer process steps overall. With extract brewing you primarily just need a boil kettle and a fermenter . A majority of the malt sugars you will be fermenting come from an “Extract ”, LME ( Liquid Malt Extract ) or DME ( Dried Malt Extract ) hence the name. With all grain brewing you need a few more pieces of equipment as you will be creating your own malt sugars from scratch using crushed malted grains. In most traditional all grain brewing systems you have three vessels, a HLT (Hot Liquor Tank), MT (Mash Tun) , BK (Boil Kettle) and a Fermenter. There is also a hybrid approach called BIAB (Brew In A Bag) that allows you to perform an all-grain brew in a single vessel. With extract brewing, a typical brew day takes about 2-3 hours from start to finish, whereas all grain brewing typically takes about 4-6 hours. Both types of brewing can create amazing results and have different advantages to them. To learn More! about brewing in general click the Brewing button below.

Login

Forgot your password?

Don't have an account yet?
Create account